| IPSEC(8) | Executable programs | IPSEC(8) |
.SH "NAME" ipsec - invoke IPsec utilities
.SH "SYNOPSIS"
.HP 144u
ipsec
command
[argument...]
.HP 264u
ipsec help
.HP 336u
ipsec version
.HP 384u
ipsec directory
.SH "DESCRIPTION"
.PP ipsec invokes any of several utilities involved in controlling the
IPsec encryption/authentication system, running the specified command
with the specified argument as if it had been invoked directly. This
largely eliminates possible name collisions with other software, and also
permits some centralized services.
.PP ipsec help lists the available commands. Most have their own
manual pages.
.PP ipsec version outputs the software version.
.PP ipsec directory reports where the ipsec sub-commands are
stored.
.SH "COMMANDS"
.PP To get a list of supported commands, use the command ipsec --help.
The full set of commands are listed below:
.PP ipsec start
ipsec stop
ipsec restart
ipsec listen
Used to control the pluto daemon using the host init system. Supported init systems are sysv, systemd, upstart and openrc.
See ipsec-start(8), ipsec-stop(8), ipsec-listen(8), and ipsec-restart(8).
.RE
.PP ipsec add
ipsec up
ipsec start
ipsec route
ipsec unroute
ipsec ondemand
ipsec down
ipsec delete
ipsec redirect
ipsec replace
Used to manually add, remove and manipulate connections.
See ipsec-add(8), ipsec-redirect(8), ipsec-up(8), ipsec-start(8), ipsec-route(8), ipsec-unroute(8), ipsec-ondemand(8), ipsec-down(8), ipsec-replace(8), and ipsec-delete(8).
.RE
.PP ipsec status
ipsec briefstatus
ipsec connectionstatus
ipsec briefconnectionstatus
ipsec trafficstatus
ipsec shuntstatus
Used to display information about connections and their current status.
See ipsec-status(8), ipsec-briefstatus(8), ipsec-trafficstatus(8), ipsec-connectionstatus(8), ipsec-shuntstatus(8), and ipsec-briefconnectionstatus(8).
.RE
.PP ipsec initnss
ipsec checknss
ipsec import
ipsec listall
ipsec listcerts
ipsec rereadsecrets
ipsec listpubkeys
ipsec rereadcerts
ipsec listcacerts
ipsec rereadall
ipsec rereadsecrets
Used to initialise, verify, and manipulate the NSS database that contains all the X.509 certificate information and private RSA keys.
See ipsec-initnss(8), ipsec-rereadall(8), ipsec-rereadsecrets(8), ipsec-listall(8), ipsec-checknss(8), ipsec-import(8), ipsec-rereadcerts(8), ipsec-listcerts(8), ipsec-listcacerts(8), ipsec-fips(8), ipsec-rereadsecrets(8), ipsec-listpubkeys(8), and ipsec-pk12status(8).
.RE
.PP ipsec fetchcrls
ipsec listcrls
Update and display the Certificate Revocation List.
See ipsec-fetchcrls(8), and ipsec-listcrls(8).
.RE
.PP ipsec certutil
ipsec crlutil
ipsec modutil
ipsec pk12util
ipsec vfychain
Wrappers around the NSS pk12util, modutil, certutil, and crlutil that can be used to directly manipulate Libreswan's NSS database.
See ipsec-certutil(8), ipsec-crlutil(8). ipsec-modutil(8), ipsec-pk12util(8), and ipsec-vfychain(8).
.RE
.PP ipsec checkconfig
ipsec readwriteconf
Used to validate and dump the ipsec file (default /etc/ipsec.conf).
See ipsec-checkconfig(8), and ipsec-readwriteconf(8).
.RE
.PP ipsec checknflog
ipsec stopnflog
Used to initialise and delete iptable rules for the nflog devices when specified via the nflog= or nflog-all= configuration options.
See ipsec-checknflog(8), and ipsec-stopnflog(8).
.RE
.PP ipsec whack
Low-level utility for manipulating Libreswan's daemon pluto.
See ipsec-whack(8).
.RE
.PP ipsec pluto
Libreswan's daemon that implements the Internet Key Exchange protocols.
See ipsec-pluto(8).
.RE
.PP ipsec showhostkey
ipsec newhostkey
ipsec ecdsasigkey
ipsec eddsasigkey
ipsec rsasigkey
Generate and display raw host keys stored in the NSS database. ipsec eddsasigkey is not built by default.
See: ipsec-showhostkey(8), ipsec-newhostkey(8), ipsec-ecdsasigkey(8), ipsec-eddsasigkey(8), ipsec-rsasigkey(8).
.RE
.PP ipsec algparse
Utility for displaying and verifying cryptographic proposals.
See: ipsec-algparse(8).
.RE
.PP ipsec showroute
Utility for displaying the routing information.
See: ipsec-showroute(8).
.RE
.PP ipsec letsencrypt
Utility for generating letsencrypt keys.
See: ipsec-letsencrypt(8).
.RE
.PP ipsec fipsstatus
ipsec cavp
Display FIPS status and run FIPS crypto tests for CAVP complance.
See: ipsec-fipsstatus(8), ipsec-cavp(8).
.RE
.SH "RETURN CODE"
.PP The ipsec command passes the return code of the sub-command back to the
caller. The only exception is when ipsec pluto is used without
--nofork, as it will fork into the background and the ipsec command
returns success while the pluto daemon may in fact exit with an error code
after the fork.
FILES
.PP /usr/libexec/ipsec usual utilities directory
SEE ALSO
.PP ipsec.conf(5), ipsec-add(8), ipsec-algparse(8), ipsec-briefconnectionstatus(8), ipsec-briefstatus(8), ipsec-certutil(8), ipsec-checkconfig(8), ipsec-checknflog(8), ipsec-checknss(8), ipsec-connectionstatus(8), ipsec-crlutil(8), ipsec-delete(8), ipsec-down(8), ipsec-ecdsasigkey(8), ipsec-fetchcrls(8), ipsec-fipsstatus(8), ipsec-globalstatus(8), ipsec-import(8), ipsec-initnss(8), ipsec-letsencrypt(8), ipsec-listall(8), ipsec-listcacerts(8), ipsec-listcerts(8), ipsec-listcrls(8), ipsec-listen(8), ipsec-listpubkeys(8), ipsec-modutil(8), ipsec-newhostkey(8), ipsec-ondemand(8), ipsec-pk12util(8), ipsec-pluto(8), ipsec-purgeocsp(8), ipsec-redirect(8), ipsec-replace(8), ipsec-rereadall(8), ipsec-rereadcerts(8), ipsec-rereadsecrets(8), ipsec-restart(8), ipsec-route(8), ipsec-rsasigkey(8), ipsec-setup(8), ipsec-showhostkey(8), ipsec-showroute(8), ipsec-showstates(8), ipsec-shuntstatus(8), ipsec-start(8), ipsec-status(8), ipsec-stop(8), ipsec-trafficstatus(8), ipsec-unroute(8), ipsec-up(8), ipsec-vfychain(8), ipsec-whack(8)
.SH "AUTHOR"
Andrew Cagney, Daniel Kahn Gillmor, D. Hugh Redelmeier, Jose Quaresma,
Michael Richardson, Paul Wouters, Tuomo Soini
| 10/23/2026 | Libreswan v5.4.1-HEAD |