OS Manuals

lfs-df(1)

lfs-df - report Lustre filesystem disk usage

LFS-DF(1) Lustre User Utilities LFS-DF(1)

lfs-df - report Lustre filesystem disk usage

lfs df [-i] [-h|-H] [--lazy|-l] [--no-header|-N] [--only-summary|-s] [--output|-u FIELD_LIST] [--pool|-p FSNAME[.POOL]] [--mdt|-m] [--ost|-o] [--verbose|-v] [path]

lfs df displays filesystem usage information by default for each Lustre filesystem currently mounted on that node, or for the filesystem that contains PATH if given. It displays the current usage and totals for each MDT and OST separately, as well as a per-filesystem summary that matches df(1) output for each filesystem.

By default lfs df reports the SPACE usage of the OSTs (the MDT space usage is shown only for reference). With -i it reports the INODE (object) usage for each target and in the summary. For ZFS-backed targets, the IUsed count accurately reflects the number of in-use objects on each target, but the Inodes total and Free inode counts are ESTIMATED based on the current average (mean) space used per object on each target, and may fluctuate over time to reflect the current usage pattern of the target. The estimate becomes more accurate as the target becomes more full, assuming the usage pattern is consistent.

lfs df may also report additional target status as the last column in the display, if there are issues with that target. States include:

The target has a failed drive in the RAID device, or is undergoing RAID reconstruction. This state is marked on the server automatically for ZFS targets via zed(8), or a (user-supplied) script that monitors the target device and sets 'lctl set_param obdfilter.TARGET.degraded=1' on the OST. This target will be avoided for new allocations, but will still be used for existing files located there or if there are not enough non-degraded OSTs to make up a widely-striped file.
The target is configured to deny new OST object creation by the 'lctl set_param obdfilter.FSNAME-OSTXXXX.no_create=1' option, or new subdirectory creation by the 'lctl set_param obdfilter.FSNAME-MDTXXXX.no_create=1' parameter or '-o no_create' mount option. This can be used to add an OST or MDT to the filesystem without allowing objects to be allocated on it yet, or for other reasons.
The target filesystem is marked read-only due to filesystem corruption detected by ldiskfs or ZFS. No modifications are allowed on this OST, and it needs to have e2fsck(8) or zpool(8) scrub run to repair the underlying filesystem.
The target filesystem has less than the minimum required free space and will not be used for new object allocations until it has more free space.
The target filesystem has less than the minimum required free inodes and will not be used for new object allocations until it has more free inodes.
The target filesystem is using a flash (non-rotational) storage device. This lower-case status is only shown in conjunction with the -v option, since it is not an error condition.

The various options supported by lfs df are listed and explained below:

Print output in a human readable format (e.g. 16.3T, 4.25P). Suffixes are base-2 units (i.e. 1 GiB = 1024 MiB).
Like -h, but suffixes are SI base-10 units (i.e. 1 GB = 1000 MB).
Print information about the inode usage and totals for the MDTs and OSTs rather than space usage. Note that the Inodes total, IUsed, and IFree counts typically reflect the SUM of values from the MDTs. If the total number of objects available on the OSTs is smaller (factoring in the filesystem default stripe_count, as one OST object is used for each stripe in a file) then the reported Inodes and IFree values will be reduced to reflect the MINIMUM number of files that could potentially be created with the default stripe count. The actual total number of files that can be created may be different.
Do not attempt to contact any OST or MDT not currently connected to the client. This avoids blocking the lfs df output if a target is offline or unreachable, and only returns the space on OSTs that can currently be accessed.
Filter output to show information on MDT devices. If INDEX is specified, it must be attached to the option without a space, like "-mINDEX" or "--mdt=INDEX". For example: "-m0" or "--mdt=0". Can be used with -o to show both types of devices, which is equivalent to having neither option.
Suppress column headers in the output. This is useful for scripting and automation where only the data values are needed without the header line. When combined with --output, --ost, and --mdt, this allows for clean extraction of specific field values.
Display only the filesystem summary line without showing individual MDT and OST entries. This provides a consolidated view of the total filesystem usage, Useful for monitoring scripts that only need overall filesystem statistics.
Filter output to show information on OST devices. If INDEX is specified, it must be attached to the option without a space, like "-oINDEX" or "--ost=INDEX". For example: "-o0" or "--ost=0". Can be used with -m to show both types of devices, which is equivalent to having neither option.
Print only the specified fields in a customizable format. This allows printing only specific fields, avoiding the need for complex awk(1) or grep(1) parsing to extract values in test scripts and automation. Headers are shown when no specific OST or MDT index is specified. When a specific target index is given (e.g., -o0 or -m1), headers are suppressed for easier scripting. Field aliases are provided to match the column headings reported by df(1). Available fields include:
(alias device) Display the UUID of the target device.
(alias total, btotal) Display the total block space available (in KiB by default).
(alias bused) Display the used block space (in KiB by default).
(alias bfree) Display the free block space (in KiB by default).
(alias bavail) Display the available block space (in KiB by default).
(alias usepct, bpct, pct) Display the percentage of used block space.
(alias inodes) Display the total number of inodes (in KiB by default).
Display the number of used inodes (in KiB by default).
(alias ifree) Display the number of free inodes (in KiB by default).
(alias iusepct, ipct) Display the percentage of used inodes.
Display the failure-domain.
Display the mount point path.
Display the target os_state flags.
Fields are displayed in the order specified in FIELD_LIST. When using --output, both block and inode fields can be mixed in the same command, allowing users to see comprehensive statistics in a single view.
Limit the usage to report only MDTs and OSTs that are in the specified POOL. If multiple filesystems are mounted, list OSTs in POOL for every filesystem, or limit the display to only a pool for a specific filesystem if FSNAME.POOL is given. Specifying both the fsname and pool like:
lfs df --pool=FSNAME.POOL
is equivalent to specifying the mountpoint for the given FSNAME:
lfs df --pool=pool /mnt/FSNAME
Show deactivated MDTs and OSTs in the listing, along with any additional status flags for each MDT and OST. By default, any MDTs and OSTs that are deactivated by the administrator are not shown. However, targets that are only temporarily inaccessible are still shown.

Lists space usage per OST and MDT for the testfs filesystem in human readable format:

# lfs df -hv /mnt/testfs
UUID                 bytes  Used   Avail Use% Mounted on
testfs-MDT0000_UUID  13.0G  1.2G   11.0G  10% /testfs[MDT:0]
testfs-OST0000_UUID   3.6T  2.9T  585.7G  84% /testfs[OST:0]
testfs-OST0001_UUID   3.6T  3.1T  472.5G  87% /testfs[OST:1] D
testfs-OST0002_UUID   3.6T  3.0T  570.3G  84% /testfs[OST:2] DR
OST0003           : inactive device
testfs-OST0006_UUID   5.4T  4.9T  417.8G  92% /testfs[OST:3]
filesystem_summary:  16.2T 13.8T    2.0T  88% /testfs

The above example output shows that OST0003 is currently temporarily inactive or offline, while OST0004 and OST0005 are not shown at all, either because they are marked permanently offline by the administrator (via lctl set_param -P osc.testfs-OST000[45].active=0) or they were never added to the filesystem. The testfs-OST0001 and testfs-OST0002 targets are currently marked Degraded (perhaps they both share the same underlying storage controller), while testfs-OST0002 is also marked Read-only, after detecting non-recoverable corruption in the backing filesystem.

List inode usage per OST and MDT for all mounted Lustre filesystems:

# lfs df -iH
UUID                Inodes  IUsed  IFree IUse% Mounted on
testfs-MDT0000_UUID 932.2k 884.6k  47.6k  95% /testfs[MDT:0]
testfs-OST0000_UUID 267.5k 179.6k  87.8k  67% /testfs[OST:0]
testfs-OST0001_UUID 268.9k 173.5k  95.4k  64% /testfs[OST:1] D
testfs-OST0002_UUID 267.5k 169.6k  97.9k  63% /testfs[OST:2] DR
OST0003           : inactive device
testfs-OST0006_UUID 426.1k 377.4k  48.7k  88% /testfs[OST:3]
filesystem_summary: 932.1k 884.6k  47.6k  95% /testfs

List space usage for only the ssd pool of the testfs filesystem:

# lfs df --pool ssd /mnt/testfs

List all MDTs and OSTs for the testfs filesystem, even if not currently connected:

# lfs df -v /mnt/testfs

List space usage for only OST index 1 of the testfs filesystem:

# lfs df -o1 /mnt/testfs

Display custom fields showing both block and inode statistics:

# lfs df --output=source,size,used,itotal,iused -h /mnt/lustre
UUID                       bytes        Used      Inodes       IUsed
lustre-MDT0000_UUID       122.1M        1.6M       97.7K         275
lustre-OST0000_UUID       305.8M        1.4M       97.7K         302
lustre-OST0001_UUID       305.8M        1.4M       97.7K         302
filesystem_summary:       611.5M        2.7M       97.7K         275

Display only available space and usage percentages:

# lfs df --output=source,avail,pcent,iavail,ipcent /mnt/lustre
UUID                   Available Use%       IFree IUse%
lustre-MDT0000_UUID       112156   2%       99725   1%
lustre-OST0000_UUID       284544   1%       99698   1%
lustre-OST0001_UUID       284544   1%       99698   1%
filesystem_summary:       569088   1%       99725   1%

Display filesystem summary with custom field order:

# lfs df --output=pcent,avail,used,size,target /mnt/lustre
Use%   Available        Used   1K-blocks Mounted on


  2%      112156        1664      125056 /mnt/lustre[MDT:0]


  1%      284544        1400      313104 /mnt/lustre[OST:0]


  1%      284544        1400      313104 /mnt/lustre[OST:1]


  1%      569088        2800      626208 /mnt/lustre

Single field output with headers (all targets):

# lfs df --output=avail /mnt/lustre
Available


    112156


    284544


    284544


    569088

Multiple field output with headers:

# lfs df --output=source,avail /mnt/lustre
UUID                   Available
lustre-MDT0000_UUID       112156
lustre-OST0000_UUID       284544
lustre-OST0001_UUID       284544
filesystem_summary:       569088

Multiple field output without headers and filesystem summary:

# lfs df --output=source,avail --no-header /mnt/lustre
lustre-MDT0000_UUID       112156
lustre-OST0000_UUID       284544
lustre-OST0001_UUID       284544

OST available space without headers (useful for finding minimum):

# lfs df --output=avail --no-header -o /mnt/lustre


     284544


     284544

Single field for target OST1 (no headers, ideal for scripting):

# lfs df --output=avail --ost=1 /mnt/lustre


     284544

Display only the filesystem summary:

# lfs df --only-summary /mnt/lustre
filesystem_summary:       626208        2800      569088   1%  /mnt/lustre

lfs df is part of the lustre(7) filesystem package since release 1.4.0

lfs(1), lustre(7)

2024-08-15 Lustre

lustre 2.17.59-r2 · enterprise-packages · ingested 2026-10-11