Usage: sg_get_lba_status  [--16] [--32] [--blockhex] [--brief]
                          [--element-id=EI] [--help] [--hex] [--inhex=FN]
                          [--json[=JO]] [--js_file=JFN] [--lba=LBA]
                          [--maxlen=LEN] [--raw] [--readonly]
                          [--report-type=RT] [--scan-len=SL] [--verbose]
                          [--version] DEVICE
  where:
    --16|-S           use GET LBA STATUS(16) cdb (def)
    --32|-T           use GET LBA STATUS(32) cdb
    --blockhex|-B     outputs the (number of) blocks field  in hex
    --brief|-b        a descriptor per line:
                          <lba_hex blocks_hex p_status add_status>
                      use twice ('-bb') for given LBA provisioning status
    --element-id=EI|-e EI      Element Identifier (EI) (def: 0 --> all)
    --help|-h         print out usage message
    --hex|-H          output in hexadecimal
    --inhex=FN|-i FN    input taken from file FN rather than DEVICE,
                        assumed to be ASCII hex or, if --raw, in binary
    --json[=JO]|-j[=JO]    output in JSON instead of plain text
                           Use --json=? for JSON help
    --js-file=JFN|-J JFN    JFN is a filename to which JSON output is
                            written (def: stdout); truncates then writes
    --lba=LBA|-l LBA    starting LBA (logical block address) (def: 0)
    --maxlen=LEN|-m LEN    max response length (allocation length in cdb)
                           (def: 0 -> 1024 bytes)
    --raw|-r          output in binary, unless if --inhex=FN is given,
                      in which case input file is binary
    --readonly|-R     open DEVICE read-only (def: read-write)
    --report-type=RT|-t RT    report type: 0->all LBAs (def);
                                1-> LBAs with non-zero provisioning status
                                2-> LBAs that are mapped
                                3-> LBAs that are deallocated
                                4-> LBAs that are anchored
                                16-> LBAs that may return unrecovered error
    --scan-len=SL|-s SL    SL in maximum scan length (unit: logical blocks)
                           (def: 0 which implies no limit)
    --verbose|-v      increase verbosity
    --version|-V      print version string and exit

Performs a SCSI GET LBA STATUS(16) or GET LBA STATUS(32) command (SBC-3 and
SBC-4). The --element-id=EI and the --scan-len=SL fields are only active
on the 32 byte cdb variant. If --inhex=FN is given then contents of FN is
assumed to be a response to this command.