Usage: sg_sat_identify [--ck_cond] [--extend] [--help] [--hex] [--ident]
                       [--len=CLEN] [--packet] [--raw] [--readonly]
                       [--verbose] [--version] DEVICE
  where:
    --ck_cond|-c     sets ck_cond bit in cdb (def: 0)
    --extend|-e      sets extend bit in cdb (def: 0)
    --help|-h        print out usage message then exit
    --hex|-H         output response in hex
    --ident|-i       output WWN prefixed by 0x, if not available output
                     0x0000000000000000
    --len=CLEN| -l CLEN    CLEN is cdb length: 12, 16 or 32 bytes
                           (default: 16)
    --packet|-p      do IDENTIFY PACKET DEVICE (def: IDENTIFY DEVICE)
                     command
    --raw|-r         output response in binary to stdout
    --readonly|-R    open DEVICE read-only (def: read-write)
    --verbose|-v     increase verbosity
    --version|-V     print version string and exit

Performs a ATA IDENTIFY (PACKET) DEVICE command via a SAT layer using
a SCSI ATA PASS-THROUGH(12), (16) or (32) command. Only SAT layers
compliant with SAT-4 revision 5 or later will support the SCSI ATA
PASS-THROUGH(32) command.