Usage: sg_write_long [--16] [--cor_dis] [--help] [--in=IF] [--lba=LBA]
                     [--pblock] [--verbose] [--version] [--wr_uncor]
                     [--xfer_len=BTL] DEVICE
  where:
    --16|-S              do WRITE LONG(16) (default: 10)
    --cor_dis|-c         set correction disabled bit
    --help|-h            print out usage message
    --in=IF|-i IF        input from file called IF (default: use
                         0xff bytes as fill)
    --lba=LBA|-l LBA     logical block address (default: 0)
    --pblock|-p          physical block (default: logical block)
    --verbose|-v         increase verbosity
    --version|-V         print version string then exit
    --wr_uncor|-w        set an uncorrectable error (no data transferred)
    --xfer_len=BTL|-x BTL    byte transfer length (< 10000) (default:
                             520 bytes)

Performs a SCSI WRITE LONG (10 or 16) command. Writes a single block
including associated ECC data. That data may be obtained from the
SCSI READ LONG command. See the sg_read_long utility.