2026/11/09 15:22:39 INFO: metrics: disable exposing PSI metrics because of failed init: open /sys/fs/cgroup/cpu.pressure: no such file or directory vmalert processes alerts and recording rules. See the docs at https://docs.victoriametrics.com/victoriametrics/vmalert/ . -blockcache.missesBeforeCaching int The number of cache misses before putting the block into cache. Higher values may reduce indexdb/dataBlocks cache size at the cost of higher CPU and disk read usage (default 2) -configCheckInterval duration Interval for checking for changes in '-rule', '-rule.templates' and '-notifier.config' files. By default, the checking is disabled. Send SIGHUP signal in order to force config check for changes. -datasource.appendTypePrefix Whether to add type prefix to -datasource.url based on the query type. Set to true if sending different query types to the vmselect URL. -datasource.basicAuth.password string Optional basic auth password for -datasource.url -datasource.basicAuth.passwordFile string Optional path to basic auth password to use for -datasource.url -datasource.basicAuth.username string Optional basic auth username for -datasource.url -datasource.basicAuth.usernameFile string Optional path to basic auth username to use for -datasource.url -datasource.bearerToken string Optional bearer auth token to use for -datasource.url. -datasource.bearerTokenFile string Optional path to bearer token file to use for -datasource.url. -datasource.disableKeepAlive Whether to disable long-lived connections to the datasource. If true, disables HTTP keep-alive and will only use the connection to the server for a single HTTP request. -datasource.disableStepParam Whether to disable adding 'step' param in instant queries to the configured -datasource.url and -remoteRead.url. Only valid for prometheus datasource. This might be useful when using vmalert with datasources that do not support 'step' param for instant queries, like Google Managed Prometheus. It is not recommended to enable this flag if you use vmalert with VictoriaMetrics. -datasource.headers string Optional HTTP extraHeaders to send with each request to the corresponding -datasource.url. For example, -datasource.headers='My-Auth:foobar' would send 'My-Auth: foobar' HTTP header with every request to the corresponding -datasource.url. Multiple headers must be delimited by '^^': -datasource.headers='header1:value1^^header2:value2' -datasource.idleConnTimeout duration Defines a duration for idle (keep-alive connections) to exist. Consider setting this value less than "-http.idleConnTimeout". It must prevent possible "write: broken pipe" and "read: connection reset by peer" errors. (default 50s) -datasource.maxIdleConnections int Defines the number of idle (keep-alive connections) to each configured datasource. Consider setting this value equal to the value: groups_total * group.concurrency. Too low a value may result in a high number of sockets in TIME_WAIT state. (default 100) -datasource.oauth2.clientID string Optional OAuth2 clientID to use for -datasource.url -datasource.oauth2.clientSecret string Optional OAuth2 clientSecret to use for -datasource.url -datasource.oauth2.clientSecretFile string Optional OAuth2 clientSecretFile to use for -datasource.url -datasource.oauth2.endpointParams string Optional OAuth2 endpoint parameters to use for -datasource.url . The endpoint parameters must be set in JSON format: {"param1":"value1",...,"paramN":"valueN"} -datasource.oauth2.scopes string Optional OAuth2 scopes to use for -datasource.url. Scopes must be delimited by ';' -datasource.oauth2.tokenUrl string Optional OAuth2 tokenURL to use for -datasource.url -datasource.queryStep duration How far a value can fallback to when evaluating queries to the configured -datasource.url and -remoteRead.url. Only valid for prometheus datasource. For example, if -datasource.queryStep=15s then param "step" with value "15s" will be added to every query. If set to 0, rule's evaluation interval will be used instead. (default 5m0s) -datasource.roundDigits int Adds "round_digits" GET param to datasource requests which limits the number of digits after the decimal point in response values. Only valid for VictoriaMetrics as the datasource. -datasource.showURL Whether to avoid stripping sensitive information such as auth headers or passwords from URLs in log messages or UI and exported metrics. It is hidden by default, since it can contain sensitive info such as auth key -datasource.tlsCAFile string Optional path to TLS CA file to use for verifying connections to -datasource.url. By default, system CA is used -datasource.tlsCertFile string Optional path to client-side TLS certificate file to use when connecting to -datasource.url -datasource.tlsInsecureSkipVerify Whether to skip tls verification when connecting to -datasource.url -datasource.tlsKeyFile string Optional path to client-side TLS certificate key to use when connecting to -datasource.url -datasource.tlsServerName string Optional TLS server name to use for connections to -datasource.url. By default, the server name from -datasource.url is used -datasource.url string Datasource compatible with Prometheus HTTP API. It can be single node VictoriaMetrics or vmselect endpoint. Required parameter. Supports address in the form of IP address with a port (e.g., http://127.0.0.1:8428) or DNS SRV record. See also -remoteRead.disablePathAppend and -datasource.showURL -disableAlertgroupLabel Whether to disable adding group's Name as label to generated alerts and time series. -dryRun Whether to check only config files without running vmalert. The rules file are validated. The -rule flag must be specified. -enableTCP6 Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used -envflag.enable Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/victoriametrics/single-server-victoriametrics/#environment-variables for more details -envflag.prefix string Prefix for environment variables if -envflag.enable is set -evaluationInterval duration How often to evaluate the rules (default 1m0s) -external.alert.source string External Alert Source allows to override the Source link for alerts sent to AlertManager for cases where you want to build a custom link to Grafana, Prometheus or any other service. Supports templating - see https://docs.victoriametrics.com/victoriametrics/vmalert/#templating . For example, link to Grafana: -external.alert.source='explore?orgId=1&left={"datasource":"VictoriaMetrics","queries":[{"expr":{{.Expr|jsonEscape|queryEscape}},"refId":"A"}],"range":{"from":"now-1h","to":"now"}}'. Link to VMUI: -external.alert.source='vmui/#/?g0.expr={{.Expr|queryEscape}}'. If empty 'vmalert/alert?group_id={{.GroupID}}&alert_id={{.AlertID}}' is used. -external.label array Optional label in the form 'Name=value' to add to all generated recording rules and alerts. In case of conflicts, original labels are kept with prefix 'exported_'. Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -external.url string External URL is used as alert's source for sent alerts to the notifier. By default, hostname is used as address. -filestream.disableFadvise Whether to disable fadvise() syscall when reading large data files. The fadvise() syscall prevents from eviction of recently accessed data from OS page cache during background merges and backups. In some rare cases it is better to disable the syscall if it uses too much CPU -flagsAuthKey value Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides -httpAuth.* Flag value can be read from the given file when using -flagsAuthKey=file:///abs/path/to/file or -flagsAuthKey=file://./relative/path/to/file. Flag value can be read from the given http/https url when using -flagsAuthKey=http://host/path or -flagsAuthKey=https://host/path -fs.disableAdviseRandomRead Whether to disable FADV_RANDOM and MADV_RANDOM hints for data part files. Typical queries with selectors access data part files at random offsets, so FADV_RANDOM is enforced to reduce excessive disk readahead.Use this flag if your query read pattern benefits from sequential read (e.g. query by metric name without selectors) to prefer FADV_NORMAL. (default true) -fs.disableMincore Whether to disable the mincore() syscall for checking mmap()ed files. By default, mincore() is used to detect whether mmap()ed file pages are resident in memory. Disabling mincore() may be needed on older ZFS filesystems (below 2.1.5), since it may trigger ZFS bug. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/10327 for details. -fs.disableMmap Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread() -fs.maxConcurrency int The maximum number of concurrent goroutines to work with files; smaller values may help reducing Go scheduling latency on systems with small number of CPU cores; higher values may help reducing data ingestion latency on systems with high-latency storage such as NFS or Ceph (default 256 = 16x CPU cores, capped at 256) -group.maxStartDelay duration Defines the max delay before starting the group evaluation. Group's start is artificially delayed for random duration on interval [0..min(--group.maxStartDelay, group.interval)]. This helps smoothing out the load on the configured datasource, so evaluations aren't executed too close to each other. (default 5m0s) -healthcheck Whether to check that the running process accepts connections at -httpListenAddr and exit. The exit code is non-zero if the check fails. This is useful for Docker HEALTHCHECK in images without curl or wget. Pass the same -httpListenAddr as the checked process has -http.connTimeout duration Incoming connections to -httpListenAddr are closed after the configured timeout. This may help evenly spreading load among a cluster of services behind TCP-level load balancer. Zero value disables closing of incoming connections (default 2m0s) -http.disableCORS Disable CORS for all origins (*) -http.disableKeepAlive Whether to disable HTTP keep-alive for incoming connections at -httpListenAddr -http.disableResponseCompression Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth -http.header.csp string Value for 'Content-Security-Policy' header, recommended: "default-src 'self'" -http.header.disableServerHostname Whether to disable 'X-Server-Hostname' header in HTTP responses -http.header.frameOptions string Value for 'X-Frame-Options' header -http.header.hsts string Value for 'Strict-Transport-Security' header, recommended: 'max-age=31536000; includeSubDomains' -http.idleConnTimeout duration Timeout for incoming idle http connections (default 1m0s) -http.maxGracefulShutdownDuration duration The maximum duration for a graceful shutdown of the HTTP server. During this period the server stops accepting new connections, but it will continue serving existing connections. The remaining in-flight requests are canceled before the deadline, so the shutdown can finish within this duration. A highly loaded server may require increased value for a graceful shutdown (default 7s) -http.pathPrefix string An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus -http.shutdownDelay duration Optional delay before http server shutdown. During this delay, the server returns non-OK responses from /health page, so load balancers can route new requests to other servers -httpAuth.password value Password for HTTP server's Basic Auth. The authentication is disabled if -httpAuth.username is empty Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file. Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path -httpAuth.username string Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password -httpListenAddr array Address to listen for incoming http requests. Use unix:/path/to/socket to listen on Unix domain socket. Note that -tls and -httpListenAddr.useProxyProtocol cannot be used with Unix sockets Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -httpListenAddr.useProxyProtocol array Whether to use proxy protocol for connections accepted at the corresponding -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing Supports array of values separated by comma or specified via multiple flags. Empty values are set to false. -internStringCacheExpireDuration duration The expiry duration for caches for interned strings. See https://en.wikipedia.org/wiki/String_interning . See also -internStringMaxLen and -internStringDisableCache (default 6m0s) -internStringDisableCache Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen -internStringMaxLen int The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500) -loggerDisableTimestamps Whether to disable writing timestamps in logs -loggerErrorsPerSecondLimit int Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit -loggerFormat string Format for logs. Possible values: default, json (default "default") -loggerJSONFields string Allows renaming fields in JSON formatted logs. Example: "ts:timestamp,msg:message" renames "ts" to "timestamp" and "msg" to "message". Supported fields: ts, level, caller, msg -loggerLevel string Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO") -loggerMaxArgLen int The maximum length of a single logged argument. Longer arguments are replaced with 'arg_start..arg_end', where 'arg_start' and 'arg_end' is prefix and suffix of the arg with the length not exceeding -loggerMaxArgLen / 2 (default 5000) -loggerOutput string Output for the logs. Supported values: stderr, stdout (default "stderr") -loggerTimezone string Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC") -loggerWarnsPerSecondLimit int Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit -memory.allowedBytes size Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage. The process may behave unexpectedly if this flag is set too small (e.g., 1 byte). Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0) -memory.allowedPercent float Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60) -metrics.exposeMetadata Whether to expose TYPE and HELP metadata at the /metrics page, which is exposed at -httpListenAddr . The metadata may be needed when the /metrics page is consumed by systems, which require this information. For example, Managed Prometheus in Google Cloud - https://cloud.google.com/stackdriver/docs/managed-prometheus/troubleshooting#missing-metric-type -metricsAuthKey value Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides -httpAuth.* Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file. Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path -notifier.basicAuth.password array Optional basic auth password for -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.basicAuth.passwordFile array Optional path to basic auth password file for -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.basicAuth.username array Optional basic auth username for -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.basicAuth.usernameFile array Optional path to basic auth username file for -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.bearerToken array Optional bearer token for -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.bearerTokenFile array Optional path to bearer token file for -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.blackhole Whether to blackhole alerting notifications. Enable this flag if you want vmalert to evaluate alerting rules without sending any notifications to external receivers (eg. alertmanager). -notifier.url, -notifier.config and -notifier.blackhole are mutually exclusive. -notifier.config string Path to configuration file for notifiers -notifier.headers array Optional HTTP headers to send with each request to the corresponding -notifier.url. For example, -remoteWrite.headers='My-Auth:foobar' would send 'My-Auth: foobar' HTTP header with every request to the corresponding -notifier.url. Multiple headers must be delimited by '^^': -notifier.headers='header1:value1^^header2:value2,header3:value3' Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.oauth2.clientID array Optional OAuth2 clientID to use for -notifier.url. If multiple args are set, then they are applied independently for the corresponding -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.oauth2.clientSecret array Optional OAuth2 clientSecret to use for -notifier.url. If multiple args are set, then they are applied independently for the corresponding -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.oauth2.clientSecretFile array Optional OAuth2 clientSecretFile to use for -notifier.url. If multiple args are set, then they are applied independently for the corresponding -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.oauth2.endpointParams array Optional OAuth2 endpoint parameters to use for the corresponding -notifier.url . The endpoint parameters must be set in JSON format: {"param1":"value1",...,"paramN":"valueN"} Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.oauth2.scopes array Optional OAuth2 scopes to use for -notifier.url. Scopes must be delimited by ';'. If multiple args are set, then they are applied independently for the corresponding -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.oauth2.tokenUrl array Optional OAuth2 tokenURL to use for -notifier.url. If multiple args are set, then they are applied independently for the corresponding -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.sendTimeout array Timeout when sending alerts to the corresponding -notifier.url (default 10s) Supports array of values separated by comma or specified via multiple flags. Empty values are set to default value. -notifier.showURL Whether to avoid stripping sensitive information such as passwords from URL in log messages or UI for -notifier.url. It is hidden by default, since it can contain sensitive info such as auth key -notifier.suppressDuplicateTargetErrors Whether to suppress 'duplicate target' errors during discovery -notifier.tlsCAFile array Optional path to TLS CA file to use for verifying connections to -notifier.url. By default, system CA is used Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.tlsCertFile array Optional path to client-side TLS certificate file to use when connecting to -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.tlsInsecureSkipVerify array Whether to skip tls verification when connecting to -notifier.url Supports array of values separated by comma or specified via multiple flags. Empty values are set to false. -notifier.tlsKeyFile array Optional path to client-side TLS certificate key to use when connecting to -notifier.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.tlsServerName array Optional TLS server name to use for connections to -notifier.url. By default, the server name from -notifier.url is used Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -notifier.url array Prometheus Alertmanager URL, e.g. http://127.0.0.1:9093. List all Alertmanager URLs if it runs in the cluster mode to ensure high availability. Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -pprofAuthKey value Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides -httpAuth.* Flag value can be read from the given file when using -pprofAuthKey=file:///abs/path/to/file or -pprofAuthKey=file://./relative/path/to/file. Flag value can be read from the given http/https url when using -pprofAuthKey=http://host/path or -pprofAuthKey=https://host/path -promscrape.consul.waitTime duration Wait time used by Consul service discovery. Default value is used if not set -promscrape.consulSDCheckInterval duration Interval for checking for changes in Consul. This works only if consul_sd_configs is configured in '-promscrape.config' file. See https://docs.victoriametrics.com/victoriametrics/sd_configs/#consul_sd_configs for details (default 30s) -promscrape.discovery.concurrency int The maximum number of concurrent requests to Prometheus autodiscovery API (Consul, Kubernetes, etc.) (default 100) -promscrape.discovery.concurrentWaitTime duration The maximum duration for waiting to perform API requests if more than -promscrape.discovery.concurrency requests are simultaneously performed (default 1m0s) -promscrape.dnsSDCheckInterval duration Interval for checking for changes in dns. This works only if dns_sd_configs is configured in '-promscrape.config' file. See https://docs.victoriametrics.com/victoriametrics/sd_configs/#dns_sd_configs for details (default 30s) -pushmetrics.disableCompression Whether to disable request body compression when pushing metrics to every -pushmetrics.url -pushmetrics.extraLabel array Optional labels to add to metrics pushed to every -pushmetrics.url . For example, -pushmetrics.extraLabel='instance="foo"' adds instance="foo" label to all the metrics pushed to every -pushmetrics.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -pushmetrics.header array Optional HTTP request header to send to every -pushmetrics.url . For example, -pushmetrics.header='Authorization: Basic foobar' adds 'Authorization: Basic foobar' header to every request to every -pushmetrics.url Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -pushmetrics.interval duration Interval for pushing metrics to every -pushmetrics.url (default 10s) -pushmetrics.url array Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/victoriametrics/single-server-victoriametrics/#push-metrics . By default, metrics exposed at /metrics page aren't pushed to any remote storage Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -reloadAuthKey value Auth key for /-/reload http endpoint. It must be passed via authKey query arg. It overrides -httpAuth.* Flag value can be read from the given file when using -reloadAuthKey=file:///abs/path/to/file or -reloadAuthKey=file://./relative/path/to/file. Flag value can be read from the given http/https url when using -reloadAuthKey=http://host/path or -reloadAuthKey=https://host/path -remoteRead.basicAuth.password string Optional basic auth password for -remoteRead.url -remoteRead.basicAuth.passwordFile string Optional path to basic auth password to use for -remoteRead.url -remoteRead.basicAuth.username string Optional basic auth username for -remoteRead.url -remoteRead.basicAuth.usernameFile string Optional path to basic auth username to use for -remoteRead.url -remoteRead.bearerToken string Optional bearer auth token to use for -remoteRead.url. -remoteRead.bearerTokenFile string Optional path to bearer token file to use for -remoteRead.url. -remoteRead.disablePathAppend Whether to disable automatic appending of '/api/v1/query' or '/select/logsql/stats_query' path to the configured -datasource.url and -remoteRead.url -remoteRead.headers string Optional HTTP headers to send with each request to the corresponding -remoteRead.url. For example, -remoteRead.headers='My-Auth:foobar' would send 'My-Auth: foobar' HTTP header with every request to the corresponding -remoteRead.url. Multiple headers must be delimited by '^^': -remoteRead.headers='header1:value1^^header2:value2' -remoteRead.idleConnTimeout duration Defines a duration for idle (keep-alive connections) to exist. Consider settings this value less to the value of "-http.idleConnTimeout". It must prevent possible "write: broken pipe" and "read: connection reset by peer" errors. (default 50s) -remoteRead.lookback duration Lookback defines how far to look into past for alerts timeseries. For example, if lookback=1h then range from now() to now()-1h will be scanned. (default 1h0m0s) -remoteRead.oauth2.clientID string Optional OAuth2 clientID to use for -remoteRead.url. -remoteRead.oauth2.clientSecret string Optional OAuth2 clientSecret to use for -remoteRead.url. -remoteRead.oauth2.clientSecretFile string Optional OAuth2 clientSecretFile to use for -remoteRead.url. -remoteRead.oauth2.endpointParams string Optional OAuth2 endpoint parameters to use for -remoteRead.url . The endpoint parameters must be set in JSON format: {"param1":"value1",...,"paramN":"valueN"} -remoteRead.oauth2.scopes string Optional OAuth2 scopes to use for -remoteRead.url. Scopes must be delimited by ';'. -remoteRead.oauth2.tokenUrl string Optional OAuth2 tokenURL to use for -remoteRead.url. -remoteRead.showURL Whether to show -remoteRead.url in the exported metrics. It is hidden by default, since it can contain sensitive info such as auth key -remoteRead.tlsCAFile string Optional path to TLS CA file to use for verifying connections to -remoteRead.url. By default, system CA is used -remoteRead.tlsCertFile string Optional path to client-side TLS certificate file to use when connecting to -remoteRead.url -remoteRead.tlsInsecureSkipVerify Whether to skip tls verification when connecting to -remoteRead.url -remoteRead.tlsKeyFile string Optional path to client-side TLS certificate key to use when connecting to -remoteRead.url -remoteRead.tlsServerName string Optional TLS server name to use for connections to -remoteRead.url. By default, the server name from -remoteRead.url is used -remoteRead.url string Optional URL to datasource compatible with Prometheus querying API. It can be single node VictoriaMetrics, vmselect or Prometheus. Remote read is used to restore alerts state. This configuration makes sense only if vmalert was configured with '-remoteWrite.url' before and has been successfully persisted its state. Supports address in the form of IP address with a port (e.g., http://127.0.0.1:8428) or DNS SRV record. See also '-remoteRead.disablePathAppend', '-remoteRead.showURL'. -remoteWrite.basicAuth.password string Optional basic auth password for -remoteWrite.url -remoteWrite.basicAuth.passwordFile string Optional path to basic auth password to use for -remoteWrite.url -remoteWrite.basicAuth.username string Optional basic auth username for -remoteWrite.url -remoteWrite.basicAuth.usernameFile string Optional path to basic auth username to use for -remoteWrite.url -remoteWrite.bearerToken string Optional bearer auth token to use for -remoteWrite.url. -remoteWrite.bearerTokenFile string Optional path to bearer token file to use for -remoteWrite.url. -remoteWrite.concurrency int Defines number of writers for concurrent writing into remote write endpoint. Default value depends on the number of available CPU cores. (default 128 = 2x CPU cores) -remoteWrite.disablePathAppend Whether to disable automatic appending of '/api/v1/write' path to the configured -remoteWrite.url. -remoteWrite.flushInterval duration Defines interval of flushes to remote write endpoint (default 2s) -remoteWrite.headers string Optional HTTP headers to send with each request to the corresponding -remoteWrite.url. For example, -remoteWrite.headers='My-Auth:foobar' would send 'My-Auth: foobar' HTTP header with every request to the corresponding -remoteWrite.url. Multiple headers must be delimited by '^^': -remoteWrite.headers='header1:value1^^header2:value2' -remoteWrite.idleConnTimeout duration Defines a duration for idle (keep-alive connections) to exist. Consider settings this value less to the value of "-http.idleConnTimeout". It must prevent possible "write: broken pipe" and "read: connection reset by peer" errors. (default 50s) -remoteWrite.maxBatchSize int Defines max number of timeseries to be flushed at once (default 10000) -remoteWrite.maxIdleConnections int Defines the number of idle (keep-alive connections) to -remoteWrite.url for the vmalert-tool debug writer, which sends every series in a separate request. Too low a value may result in a high number of sockets in TIME_WAIT state. (default 100) -remoteWrite.maxQueueSize int Defines the max number of pending datapoints to remote write endpoint (default 100000) -remoteWrite.oauth2.clientID string Optional OAuth2 clientID to use for -remoteWrite.url -remoteWrite.oauth2.clientSecret string Optional OAuth2 clientSecret to use for -remoteWrite.url -remoteWrite.oauth2.clientSecretFile string Optional OAuth2 clientSecretFile to use for -remoteWrite.url -remoteWrite.oauth2.endpointParams string Optional OAuth2 endpoint parameters to use for -remoteWrite.url . The endpoint parameters must be set in JSON format: {"param1":"value1",...,"paramN":"valueN"} -remoteWrite.oauth2.scopes string Optional OAuth2 scopes to use for -notifier.url. Scopes must be delimited by ';'. -remoteWrite.oauth2.tokenUrl string Optional OAuth2 tokenURL to use for -notifier.url. -remoteWrite.retryMaxTime duration The max time spent on retry attempts for the failed remote-write request. Change this value if it is expected for remoteWrite.url to be unreachable for more than -remoteWrite.retryMaxTime. See also -remoteWrite.retryMinInterval (default 30s) -remoteWrite.retryMinInterval duration The minimum delay between retry attempts. Every next retry attempt will double the delay to prevent hammering of remote database. See also -remoteWrite.retryMaxTime (default 1s) -remoteWrite.sendTimeout duration Timeout for sending data to the configured -remoteWrite.url. (default 30s) -remoteWrite.showURL Whether to show -remoteWrite.url in the exported metrics. It is hidden by default, since it can contain sensitive info such as auth key -remoteWrite.tlsCAFile string Optional path to TLS CA file to use for verifying connections to -remoteWrite.url. By default, system CA is used -remoteWrite.tlsCertFile string Optional path to client-side TLS certificate file to use when connecting to -remoteWrite.url -remoteWrite.tlsInsecureSkipVerify Whether to skip tls verification when connecting to -remoteWrite.url -remoteWrite.tlsKeyFile string Optional path to client-side TLS certificate key to use when connecting to -remoteWrite.url -remoteWrite.tlsServerName string Optional TLS server name to use for connections to -remoteWrite.url. By default, the server name from -remoteWrite.url is used -remoteWrite.url string Optional URL to persist alerts state and recording rules results in form of timeseries. It must support either VictoriaMetrics remote write protocol or Prometheus remote_write protocol. Supports address in the form of IP address with a port (e.g., http://127.0.0.1:8428) or DNS SRV record. For example, if -remoteWrite.url=http://127.0.0.1:8428 is specified, then the alerts state will be written to http://127.0.0.1:8428/api/v1/write . See also -remoteWrite.disablePathAppend, '-remoteWrite.showURL'. -replay.continueWithExecutionErr Whether to continue replaying other rules if a rule execution fails with a 400 or 422 response code, which can happen due to an expression syntax error or a resource limit being hit. -replay.disableProgressBar Whether to disable rendering progress bars during the replay. Progress bar rendering might be verbose or break the logs parsing, so it is recommended to be disabled when not used in interactive mode. -replay.maxDatapointsPerQuery int Max number of data points expected in one request. It affects the max time range for every '/query_range' request during the replay. The higher the value, the less requests will be made during replay. (default 1000) -replay.ruleEvaluationConcurrency int The maximum number of concurrent '/query_range' requests when replay recording rule or alerting rule with for=0. Increasing this value when replaying for a long time, since each request is limited by -replay.maxDatapointsPerQuery. (default 1) -replay.ruleRetryAttempts int Defines how many retries to make before giving up on rule if request for it returns a retriable error. (default 5) -replay.rulesDelay duration Delay before evaluating the next rule within the group. Is important for chained rules. Keep it equal or bigger than -remoteWrite.flushInterval. When set to >0, replay ignores group's concurrency setting. (default 1s) -replay.timeFrom string The time filter in RFC3339 format to start the replay from. E.g. '2020-01-01T20:07:00Z' -replay.timeTo string The time filter in RFC3339 format to finish the replay by. E.g. '2020-01-01T20:07:00Z'. By default, is set to the current time. -rpc.handshakeTimeout duration Timeout for RPC handshake between vminsert/vmselect and vmstorage. Increase this value if transient handshake failures occur. See https://docs.victoriametrics.com/victoriametrics/troubleshooting/#cluster-instability section for more details. (default 5s) -rule array Path to the files or http url with alerting and/or recording rules in YAML format. Supports hierarchical patterns and regexpes. Examples: -rule="/path/to/file". Path to a single file with alerting rules. -rule="http:///path/to/rules". HTTP URL to a page with alerting rules. -rule="dir/*.yaml" -rule="/*.yaml" -rule="gcs://vmalert-rules/tenant_%{TENANT_ID}/prod". -rule="dir/**/*.yaml". Includes all the .yaml files in "dir" subfolders recursively. Rule files support YAML multi-document. Files may contain %{ENV_VAR} placeholders, which are substituted by the corresponding env vars. Enterprise version of vmalert supports S3 and GCS paths to rules. For example: gs://bucket/path/to/rules, s3://bucket/path/to/rules S3 and GCS paths support only matching by prefix, e.g. s3://bucket/dir/rule_ matches all files with prefix rule_ in folder dir. See https://docs.victoriametrics.com/victoriametrics/vmalert/#reading-rules-from-object-storage Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -rule.defaultRuleType string Default type for rule expressions, can be overridden via "type" parameter on the group level, see https://docs.victoriametrics.com/victoriametrics/vmalert/#groups. Supported values: "graphite", "prometheus" and "vlogs". (default "prometheus") -rule.evalDelay duration Adjustment of the 'time' parameter for rule evaluation requests to compensate intentional data delay from the datasource. Normally, should be equal to '-search.latencyOffset' (cmd-line flag configured for VictoriaMetrics single-node or vmselect). This doesn't apply to groups with eval_offset specified. (default 30s) -rule.maxResolveDuration duration Limits the maximum duration for automatic alert expiration, which by default is 4 times evaluationInterval of the parent group -rule.resendDelay duration Minimum amount of time to wait before resending an alert to notifier. -rule.resultsLimit int Limits the number of alerts or recording results a single rule can produce. Can be overridden by the limit option under group if specified. If exceeded, the rule will be marked with an error and all its results will be discarded. 0 means no limit. -rule.stripFilePath Whether to strip rule file paths in logs and all API responses, including /metrics. For example, file path '/path/to/tenant_id/rules.yml' will be stripped to 'groupHashID/rules.yml'. This flag may be useful for hiding sensitive information in file paths, such as S3 bucket details. -rule.templates array Path or glob pattern to location with go template definitions for rules annotations templating. Flag can be specified multiple times. Examples: -rule.templates="/path/to/file". Path to a single file with go templates -rule.templates="dir/*.tpl" -rule.templates="/*.tpl". Relative path to all .tpl files in "dir" folder, absolute path to all .tpl files in root. -rule.templates="dir/**/*.tpl". Includes all the .tpl files in "dir" subfolders recursively. Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -rule.updateEntriesLimit int Defines the max number of rule's state updates stored in-memory. Rule's updates are available on rule's Details page and are used for debugging purposes. The number of stored updates can be overridden per rule via update_entries_limit param. (default 20) -rule.validateExpressions Whether to validate rules expressions for different types. (default true) -rule.validateTemplates Whether to validate annotation and label templates (default true) -search.denyPartialResponse Whether to deny partial responses if a part of -storageNode instances fail to perform queries; this trades availability over consistency; see also -search.maxQueryDuration -secret.flags array Comma-separated list of flag names with secret values. Values for these flags are hidden in logs and on /metrics page Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -tls array Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls Supports array of values separated by comma or specified via multiple flags. Empty values are set to false. -tlsCertFile array Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated. See also -tlsAutocertHosts Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -tlsCipherSuites array Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -tlsKeyFile array Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated. See also -tlsAutocertHosts Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -tlsMinVersion array Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13 Supports an array of values separated by comma or specified via multiple flags. Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces. -version Show VictoriaMetrics version