/usr/bin/ibqueryerrors

Usage: /usr/bin/ibqueryerrors [options]

Options:
  --suppress, -s <err1,err2,...>  suppress errors listed
  --suppress-common, -c   suppress some of the common counters
  --node-name-map <file>  node name map file
  --port-guid, -G <port_guid>  report the node containing the port
                               specified by <port_guid>
  --, -S <port_guid>      Same as "-G" for backward compatibility
  --Direct, -D <dr_path>  report the node containing the port specified
                          by <dr_path>
  --skip-sl               don't obtain SL to all destinations
  --report-port, -r       report port link information
  --threshold-file <val>  specify an alternate threshold file, default: /etc/infiniband-diags/error_thresholds
  --GNDN, -R              (This option is obsolete and does nothing)
  --data                  include data counters for ports with errors
  --switch                print data for switches only
  --ca                    print data for CA's only
  --router                print data for routers only
  --details               include transmit discard details
  --counters              print data counters only
  --clear-errors, -k      Clear error counters after read
  --clear-counts, -K      Clear data counters after read
  --load-cache <file>     filename of ibnetdiscover cache to load
  --outstanding_smps, -o <val>  specify the number of outstanding SMP's
                                which should be issued during the scan
  --config, -z <config>   use config file, default: /etc/infiniband-diags/ibdiag.conf
  --Ca, -C <ca>           Ca name to use
  --Port, -P <port>       Ca port number to use
  --timeout, -t <ms>      timeout in ms
  --m_key, -y <key>       M_Key to use in request
  --pkey-idx, -Y <idx>    P_Key table index for outgoing SA/GMP MADs
                          (default 0)
  --errors, -e            show send and receive errors
  --verbose, -v           increase verbosity level
  --debug, -d             raise debug level
  --help, -h              help message
  --version, -V           show version