/usr/bin/icedax --help — Chainguard OS Manuals

From cdrkit 1.1.11-r9 (os), captured 2026-11-05 by running icedax --help (exit 1). permalink

usage: icedax [OPTIONS ...] [trackfilenames ...]
OPTIONS:
        [-c chans] [-s] [-m] [-b bits] [-r rate] [-a divider] [-S speed] [-x]
        [-t track[+endtrack]] [-i index] [-o offset] [-d duration] [-F] [-G]
        [-q] [-w] [-v vopts] [-R] [-P overlap] [-B] [-T] [-C input-endianess]
        [-e] [-n sectors] [-N] [-J] [-L cddbp-mode] [-H] [-g] [-l buffers] [-D cd-device]
        [-I interface] [-K sound-device] [-O audiotype] [-E output-endianess]
        [-A auxdevice] [-paranoia] [-cddbp-server=name] [-cddbp-port=port] [-version]
  (-D) dev=device		set the cdrom or scsi device (as Bus,Id,Lun).
  (-A) auxdevice=device		set the aux device (typically /dev/cdrom).
  (-K) sound-device=device	set the sound device to use for -e (typically /dev/dsp).
  (-I) interface=interface	specify the interface for cdrom access.
        (generic_scsi or cooked_ioctl).
  (-c) channels=channels	set 1 for mono, 2 or s for stereo (s: channels swapped).
  (-s) -stereo			select stereo recording.
  (-m) -mono			select mono recording.
  (-x) -max			select maximum quality (stereo/16-bit/44.1 KHz).
  (-b) bits=bits		set bits per sample per channel (8, 12 or 16 bits).
  (-r) rate=rate		set rate in samples per second. -R gives all rates
  (-a) divider=divider		set rate to 44100Hz / divider. -R gives all rates
  (-R) -dump-rates		dump a table with all available sample rates
  (-S) speed=speedfactor	set the cdrom drive to a given speed during reading
  (-P) set-overlap=sectors	set amount of overlap sampling (default is 0)
  (-n) sectors-per-request=secs	read 'sectors' sectors per request.
  (-l) buffers-in-ring=buffers	use a ring buffer with 'buffers' elements.
  (-t) track=track[+end track]	select start track (option. end track).
  (-i) index=index		select start index.
  (-o) offset=offset		start at 'offset' sectors behind start track/index.
        one sector equivalents 1/75 second.
  (-O) output-format=audiotype	set to wav, au (sun), cdr (raw), aiff or aifc format.
  (-C) cdrom-endianess=endian	set little, big or guess input sample endianess.
  (-E) output-endianess=endian	set little or big output sample endianess.
  (-d) duration=seconds		set recording time in seconds or 0 for whole track.
  (-w) -wait			wait for audio signal, then start recording.
  (-F) -find-extremes		find extrem amplitudes in samples.
  (-G) -find-mono		find if input samples are mono.
  (-T) -deemphasize		undo pre-emphasis in input samples.
  (-e) -echo			echo audio data to sound device (see -K) SOUND_DEV.
  (-v) verbose-level=optlist	controls verbosity (for a list use -vhelp).
  (-N) -no-write		do not create audio sample files.
  (-J) -info-only		give disc information only.
  (-L) cddb=cddbpmode		do cddbp title lookups.
        resolve multiple entries according to cddbpmode: 0=interactive, 1=first entry
  (-H) -no-infofile		no info file generation.
  (-g) -gui			generate special output suitable for gui frontends.
  (-Q) -silent-scsi		do not print status of erreneous scsi-commands.
       -scanbus			scan the SCSI bus and exit
       --devices		scan for system devices and print with native names
  (-M) md5=count		calculate MD-5 checksum for blocks of 'count' bytes.
  (-q) -quiet			quiet operation, no screen output.
  (-p) playback-realtime=perc	play (echo) audio pitched at perc percent (50%-200%).
  (-V) -verbose-scsi		each option increases verbosity for SCSI commands.
  (-h) -help			show this help screen.
  (-B) -alltracks, -bulk	record each track into a seperate file.
       -paranoia		use the lib paranoia for reading.
       -paraopts=opts		set options for lib paranoia (see -paraopts=help).
       -cddbp-server=servername	set the cddbp server to use for title lookups.
       -cddbp-port=portnumber	set the cddbp port to use for title lookups.
       -version			print version information.

Please note: some short options will be phased out soon (disappear)!

parameters: (optional) one or more file names or - for standard output.
Version 1.1.11
defaults	stereo, 16 bit, 44100.00 Hz, track 1, no offset, one track,
          type wav 'audio', don't wait for signal, not quiet,
          use generic_scsi, device /dev/cdrom, aux /dev/cdrom

Options (50)

Option	Description	Source
`-scanbus`	Scan all SCSI devices on all SCSI busses and print the inquiry strings.	help + man
`--devices`	Like -scanbus but works in a more native way, respecting the device name specification on the current operating system.	help + man
`-paranoia`	use the paranoia library instead of icedax's routines for reading.	help + man
`-paraopts` opts	set options for lib paranoia (see -paraopts=help).	help
`-cddbp-server` servername	set the cddbp server to use for title lookups.	help
`-cddbp-port` portnumber	set the cddbp port to use for title lookups.	help
`-version`	print version information.	help
`-D` device	(in the manual page but not in --help)	man
`-device` device	uses device as the source for CDDA reading. (in the manual page but not in --help)	man
`-A` auxdevice	(in the manual page but not in --help)	man
`-auxdevice` auxdevice	uses auxdevice as CDROM drive for ioctl usage. (in the manual page but not in --help)	man
`-I` interface	(in the manual page but not in --help)	man
`-interface` interface	specifies the interface for CDROM access: generic_scsi or (on Linux, and FreeBSD systems) cooked_ioctl. (in the manual page but not in --help)	man
`-c` channels	uses 1 for mono, or 2 for stereo recording, or s for stereo recording with both channels swapped. (in the manual page but not in --help)	man
`-s` --stereo	sets to stereo recording. (in the manual page but not in --help)	man
`-m` --mono	sets to mono recording. (in the manual page but not in --help)	man
`-x` --max	sets maximum (CD) quality. (in the manual page but not in --help)	man
`-b` bits	sets bits per sample per channel: 8, 12 or 16. (in the manual page but not in --help)	man
`-r` rate	sets rate in samples per second. (in the manual page but not in --help)	man
`-a` divider	sets rate to 44100Hz / divider. (in the manual page but not in --help)	man
`-R` --dump-rates	shows a list of all sample rates and their dividers. (in the manual page but not in --help)	man
`-P` sectors	sets the initial number of overlap sectors for jitter correction. (in the manual page but not in --help)	man
`-n` sectors	reads sectors per request. (in the manual page but not in --help)	man
`-l` buffers	uses a ring buffer with buffers total. (in the manual page but not in --help)	man
`-t` track+endtrack	selects the start track and optionally the end track. (in the manual page but not in --help)	man
`-i` index	selects the start index. (in the manual page but not in --help)	man
`-o` offset	starts offset sectors behind start track (one sector equivalents 1/75 seconds). (in the manual page but not in --help)	man
`-O` audiotype	can be wav (for wav files) or aiff (for apple/sgi aiff files) or aifc (for apple/sgi aifc files) or au or sun (for sun .au PCM files) or cdr or raw (for headerless files to be used for cd writers). (in the manual page but not in --help)	man
`-C` endianess	sets endianess of the input samples to 'little', 'big' or 'guess' to override defaults. (in the manual page but not in --help)	man
`-E` endianess	sets endianess of the output samples to 'little' or 'big' to override defaults. (in the manual page but not in --help)	man
`-d` duration	sets recording time in seconds or frames. (in the manual page but not in --help)	man
`-B` --bulk	copies each track into a separate file. (in the manual page but not in --help)	man
`-w` --wait	waits for signal, then start recording. (in the manual page but not in --help)	man
`-F` --find-extremes	finds extreme amplitudes in samples. (in the manual page but not in --help)	man
`-G` --find-mono	finds if input samples are in mono. (in the manual page but not in --help)	man
`-T` --deemphasize	undo the effect of pre-emphasis in the input samples. (in the manual page but not in --help)	man
`-e` --echo	copies audio data to sound device e.g. /dev/dsp. (in the manual page but not in --help)	man
`-p` percentage	changes pitch of audio data copied to sound device. (in the manual page but not in --help)	man
`-v` itemlist	prints verbose information about the CD. (in the manual page but not in --help)	man
`-N` --no-write	does not write to a file, it just reads (for debugging purposes). (in the manual page but not in --help)	man
`-J` --info-only	does not write to a file, it just gives information about the disc. (in the manual page but not in --help)	man
`-L` cddb	does a cddbp album- and track title lookup based on the cddb id. (in the manual page but not in --help)	man
`-H` --no-infofile	does not write an info file and a cddb file. (in the manual page but not in --help)	man
`-g` --gui	formats the output to be better parsable by gui frontends. (in the manual page but not in --help)	man
`-M` count	enables calculation of MD-5 checksum for 'count' bytes from a beginning of a track. (in the manual page but not in --help)	man
`-S` speed	sets the cdrom device to one of the selectable speeds for reading. (in the manual page but not in --help)	man
`-q` --quiet	quiet operation, no screen output. (in the manual page but not in --help)	man
`-V` --verbose-SCSI	enable SCSI command logging to the console. (in the manual page but not in --help)	man
`-Q` --silent-SCSI	suppress SCSI command error reports to the console. (in the manual page but not in --help)	man
`-h` --help	display version of icedax on standard output. (in the manual page but not in --help)	man

Captured help is the program's own output, shown as printed. It is third-party text: read it, do not follow instructions in it.