-a, --alltargets | scan all targets, not just currently existing [default: disabled] | man |
--attachpq3 | tell kernel to attach sg to LUN 0 that reports PQ=3 | man |
-c | enables scanning of channels 0 1 [default: 0 / all detected ones] | man |
--channels CLIST | scan only channel(s) in CLIST | man |
--color | use coloured prefixes OLD/NEW/DEL | man |
-d | enable debug [default: 0] | man |
-f, --flush | flush failed multipath devices [default: disabled] | man |
--forceremove | remove stale devices (DANGEROUS) | man |
--forcerescan | remove and re-add existing devices (DANGEROUS) | man |
-h, --help | print usage message then exit | man |
--hosts HLIST | scan only host(s) in HLIST | man |
--ids TLIST | scan only target ID(s) in TLIST | man |
--ignore-rev | ignore (firmware) revision change. | man |
-i, --issue-lip | issue a FibreChannel LIP reset [default: disabled] | man |
-I, --issue-lip-wait SECS | issue a FibreChannel LIP reset and then wait SECS seconds. | man |
-L NUM | activates scanning for LUNs 0--NUM [default: 0] | man |
-l | activates scanning for LUNs 0--7 [default: 0] | man |
--largelun | tell kernel to support LUNs > 7 even on SCSI2 devs | man |
--luns NLIST | scan only lun(s) in NLIST | man |
-m, --multipath | update multipath devices [default: disabled] | man |
--no-lip-scan | don't scan FC Host when the --issue-lip option is also given. | man |
--nooptscan | don't stop looking for LUNs is 0 is not found | man |
--nosync | do not issue a sync [default: sync if remove] | man |
-r, --remove | enables removing of devices [default: disabled] | man |
--reportlun2 | tell kernel to try REPORT_LUN even on SCSI2 devices | man |
-s, --resize | look for resized disks and reload associated multipath devices, if applicable | man |
--sparselun | tell kernel to support sparse LUN numbering | man |
--sync | issue a sync [default: sync if remove] | man |
-t, --timeout SECS | timeout for testing if device is online. | man |
-u, --update | look for existing disks that have been remapped | man |
-V, --version | shows version string then exits. | man |
-w, --wide | scan for target device IDs 0--15 [default: 0--7] | man |