/usr/bin/victoria-logs

2026/11/08 04:59:03 INFO: metrics: disable exposing PSI metrics because of failed init: open /sys/fs/cgroup/cpu.pressure: no such file or directory

victoria-logs is a log management and analytics service.

See the docs at https://docs.victoriametrics.com/victorialogs/

  -blockcache.missesBeforeCaching int
    	The number of cache misses before putting the block into cache. Higher values may reduce indexdb/dataBlocks cache size at the cost of higher CPU and disk read usage (default 2)
  -datadog.ignoreFields array
    	Comma-separated list of fields to ignore for logs ingested via DataDog protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/datadog-agent/#dropping-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -datadog.maxRequestSize size
    	The maximum size in bytes of a single DataDog request
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
  -datadog.streamFields array
    	Comma-separated list of fields to use as log stream fields for logs ingested via DataDog protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/datadog-agent/#stream-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -defaultMsgValue string
    	Default value for _msg field if the ingested log entry doesn't contain it; see https://docs.victoriametrics.com/victorialogs/keyconcepts/#message-field (default "missing _msg field; see https://docs.victoriametrics.com/victorialogs/keyconcepts/#message-field")
  -defaultParallelReaders int
    	Default number of parallel data readers to use for executing every query; higher number of readers may help increasing query performance on high-latency storage such as NFS or S3 at the cost of higher RAM usage; see https://docs.victoriametrics.com/victorialogs/logsql/#parallel_readers-query-option (default 128 = 2x CPU cores)
  -delete.enable
    	Whether to enable /delete/* HTTP endpoints; see https://docs.victoriametrics.com/victorialogs/#how-to-delete-logs
  -deleteAuthKey value
    	authKey, which must be passed in query string to /delete/* . It overrides -httpAuth.* . See https://docs.victoriametrics.com/victorialogs/#how-to-delete-logs
    	Flag value can be read from the given file when using -deleteAuthKey=file:///abs/path/to/file or -deleteAuthKey=file://./relative/path/to/file.
    	Flag value can be read from the given http/https url when using -deleteAuthKey=http://host/path or -deleteAuthKey=https://host/path
  -elasticsearch.version string
    	Elasticsearch version to report to client (default "8.9.0")
  -enableTCP6
    	Whether to enable IPv6 for listening and dialing. By default, only IPv4 TCP and UDP are used
  -envflag.enable
    	Whether to enable reading flags from environment variables in addition to the command line. Command line flag values have priority over values from environment vars. Flags are read only from the command line if this flag isn't set. See https://docs.victoriametrics.com/victoriametrics/single-server-victoriametrics/#environment-variables for more details
  -envflag.prefix string
    	Prefix for environment variables if -envflag.enable is set
  -filestream.disableFadvise
    	Whether to disable fadvise() syscall when reading large data files. The fadvise() syscall prevents from eviction of recently accessed data from OS page cache during background merges and backups. In some rare cases it is better to disable the syscall if it uses too much CPU
  -flagsAuthKey value
    	Auth key for /flags endpoint. It must be passed via authKey query arg. It overrides -httpAuth.*
    	Flag value can be read from the given file when using -flagsAuthKey=file:///abs/path/to/file or -flagsAuthKey=file://./relative/path/to/file.
    	Flag value can be read from the given http/https url when using -flagsAuthKey=http://host/path or -flagsAuthKey=https://host/path
  -forceFlushAuthKey value
    	authKey, which must be passed in query string to /internal/force_flush . It overrides -httpAuth.* . See https://docs.victoriametrics.com/victorialogs/#forced-flush
    	Flag value can be read from the given file when using -forceFlushAuthKey=file:///abs/path/to/file or -forceFlushAuthKey=file://./relative/path/to/file.
    	Flag value can be read from the given http/https url when using -forceFlushAuthKey=http://host/path or -forceFlushAuthKey=https://host/path
  -forceMergeAuthKey value
    	authKey, which must be passed in query string to /internal/force_merge . It overrides -httpAuth.* . See https://docs.victoriametrics.com/victorialogs/#forced-merge
    	Flag value can be read from the given file when using -forceMergeAuthKey=file:///abs/path/to/file or -forceMergeAuthKey=file://./relative/path/to/file.
    	Flag value can be read from the given http/https url when using -forceMergeAuthKey=http://host/path or -forceMergeAuthKey=https://host/path
  -fs.disableAdviseRandomRead
    	Whether to disable FADV_RANDOM and MADV_RANDOM hints for data part files. Typical queries with selectors access data part files at random offsets, so FADV_RANDOM is enforced to reduce excessive disk readahead.Use this flag if your query read pattern benefits from sequential read (e.g. query by metric name without selectors) to prefer FADV_NORMAL. (default true)
  -fs.disableMincore
    	Whether to disable the mincore() syscall for checking mmap()ed files. By default, mincore() is used to detect whether mmap()ed file pages are resident in memory. Disabling mincore() may be needed on older ZFS filesystems (below 2.1.5), since it may trigger ZFS bug. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/10327 for details.
  -fs.disableMmap
    	Whether to use pread() instead of mmap() for reading data files. By default, mmap() is used for 64-bit arches and pread() is used for 32-bit arches, since they cannot read data files bigger than 2^32 bytes in memory. mmap() is usually faster for reading small data chunks than pread()
  -fs.maxConcurrency int
    	The maximum number of concurrent goroutines to work with files; smaller values may help reducing Go scheduling latency on systems with small number of CPU cores; higher values may help reducing data ingestion latency on systems with high-latency storage such as NFS or Ceph (default 256 = 16x CPU cores, capped at 256)
  -futureRetention value
    	Log entries with timestamps bigger than now+futureRetention are rejected during data ingestion; see https://docs.victoriametrics.com/victorialogs/#retention
    	The following optional suffixes are supported: s (second), h (hour), d (day), w (week), M (month), y (year). If suffix isn't set, then the duration is counted in months (default 2d)
  -http.connTimeout duration
    	Incoming connections to -httpListenAddr are closed after the configured timeout. This may help evenly spreading load among a cluster of services behind TCP-level load balancer. Zero value disables closing of incoming connections (default 2m0s)
  -http.disableCORS
    	Disable CORS for all origins (*)
  -http.disableKeepAlive
    	Whether to disable HTTP keep-alive for incoming connections at -httpListenAddr
  -http.disableResponseCompression
    	Disable compression of HTTP responses to save CPU resources. By default, compression is enabled to save network bandwidth
  -http.header.csp string
    	Value for 'Content-Security-Policy' header, recommended: "default-src 'self'"
  -http.header.disableServerHostname
    	Whether to disable 'X-Server-Hostname' header in HTTP responses
  -http.header.frameOptions string
    	Value for 'X-Frame-Options' header
  -http.header.hsts string
    	Value for 'Strict-Transport-Security' header, recommended: 'max-age=31536000; includeSubDomains'
  -http.idleConnTimeout duration
    	Timeout for incoming idle http connections (default 1m0s)
  -http.maxGracefulShutdownDuration duration
    	The maximum duration for a graceful shutdown of the HTTP server. During this period the server stops accepting new connections, but it will continue serving existing connections. The remaining in-flight requests are canceled before the deadline, so the shutdown can finish within this duration. A highly loaded server may require increased value for a graceful shutdown (default 7s)
  -http.pathPrefix string
    	An optional prefix to add to all the paths handled by http server. For example, if '-http.pathPrefix=/foo/bar' is set, then all the http requests will be handled on '/foo/bar/*' paths. This may be useful for proxied requests. See https://www.robustperception.io/using-external-urls-and-proxies-with-prometheus
  -http.shutdownDelay duration
    	Optional delay before http server shutdown. During this delay, the server returns non-OK responses from /health page, so load balancers can route new requests to other servers
  -httpAuth.password value
    	Password for HTTP server's Basic Auth. The authentication is disabled if -httpAuth.username is empty
    	Flag value can be read from the given file when using -httpAuth.password=file:///abs/path/to/file or -httpAuth.password=file://./relative/path/to/file.
    	Flag value can be read from the given http/https url when using -httpAuth.password=http://host/path or -httpAuth.password=https://host/path
  -httpAuth.username string
    	Username for HTTP server's Basic Auth. The authentication is disabled if empty. See also -httpAuth.password
  -httpListenAddr array
    	Addresses to listen for incoming http requests. Use unix:/path/to/socket to listen on Unix domain socket. Note that -tls and -httpListenAddr.useProxyProtocol cannot be used with Unix sockets
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -httpListenAddr.useProxyProtocol array
    	Whether to use proxy protocol for connections accepted at the given -httpListenAddr . See https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt . With enabled proxy protocol http server cannot serve regular /metrics endpoint. Use -pushmetrics.url for metrics pushing
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -inmemoryDataFlushInterval duration
    	The interval for guaranteed saving of in-memory data to disk. The saved data survives unclean shutdowns such as OOM crash, hardware reset, SIGKILL, etc. Bigger intervals may help increase the lifetime of flash storage with limited write cycles (e.g. Raspberry PI). Smaller intervals increase disk IO load. Minimum supported value is 1s (default 5s)
  -insert.concurrency int
    	The average number of concurrent data ingestion requests, which can be sent to every -storageNode (default 2)
  -insert.disable
    	Whether to disable both /insert/* and /internal/insert HTTP endpoints. Useful for dedicated vlselect nodes. See also -internalinsert.disable. See https://docs.victoriametrics.com/victorialogs/cluster/#security
  -insert.disableCompression
    	Whether to disable compression when sending the ingested data to -storageNode nodes. Disabled compression reduces CPU usage at the cost of higher network usage
  -insert.drainTimeout duration
    	The maximum duration for draining the in-memory buffered logs to -storageNode nodes on graceful shutdown; the logs, which cannot be drained within this duration, are dropped (default 5s)
  -insert.maxFieldsPerLine int
    	The maximum number of log fields per line, which can be read by /insert/* handlers; see https://docs.victoriametrics.com/victorialogs/faq/#how-many-fields-a-single-log-entry-may-contain (default 1000)
  -insert.maxLineSizeBytes size
    	The maximum size of a single line that can be read by /insert/* handlers. Regardless of this flag, entries above the 2 MB limit are ignored, see https://docs.victoriametrics.com/victorialogs/faq/#what-length-a-log-record-is-expected-to-have
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 262144)
  -insert.maxQueueDuration duration
    	The maximum duration to wait in the queue when -maxConcurrentInserts concurrent insert requests are executed (default 1m0s)
  -internStringCacheExpireDuration duration
    	The expiry duration for caches for interned strings. See https://en.wikipedia.org/wiki/String_interning . See also -internStringMaxLen and -internStringDisableCache (default 6m0s)
  -internStringDisableCache
    	Whether to disable caches for interned strings. This may reduce memory usage at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringCacheExpireDuration and -internStringMaxLen
  -internStringMaxLen int
    	The maximum length for strings to intern. A lower limit may save memory at the cost of higher CPU usage. See https://en.wikipedia.org/wiki/String_interning . See also -internStringDisableCache and -internStringCacheExpireDuration (default 500)
  -internaldelete.enable
    	Whether to enable /internal/delete/* HTTP endpoints, which are used by vlselect for deleting logs via delete API at vlstorage nodes; see https://docs.victoriametrics.com/victorialogs/#how-to-delete-logs
  -internalinsert.disable
    	Whether to disable /internal/insert HTTP endpoint. See also -insert.disable. See https://docs.victoriametrics.com/victorialogs/cluster/#security
  -internalinsert.maxRequestSize size
    	The maximum size in bytes of a single request, which can be accepted at /internal/insert HTTP endpoint
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
  -internalselect.disable
    	Whether to disable /internal/select/* HTTP endpoints. See also -select.disable. See https://docs.victoriametrics.com/victorialogs/cluster/#security
  -internalselect.maxConcurrentRequests int
    	The limit on the number of concurrent requests to /internal/select/* endpoints; other requests are put into the wait queue; see https://docs.victoriametrics.com/victorialogs/cluster/ (default 8)
  -journald.ignoreFields array
    	Comma-separated list of fields to ignore for logs ingested over journald protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/journald/#dropping-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -journald.includeEntryMetadata
    	Include Journald fields with double underscore prefixes
  -journald.streamFields array
    	Comma-separated list of fields to use as log stream fields for logs ingested over journald protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/journald/#stream-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -journald.tenantID string
    	TenantID for logs ingested via the Journald endpoint. See https://docs.victoriametrics.com/victorialogs/data-ingestion/journald/#multitenancy (default "0:0")
  -journald.timeField string
    	Field to use as a log timestamp for logs ingested via journald protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/journald/#time-field (default "__REALTIME_TIMESTAMP")
  -journald.useRemoteIP
    	Whether to add the remote IP address as the remote_ip log field for ingested journald messages.
  -logIngestedRows
    	Whether to log all the ingested log entries; this can be useful for debugging of data ingestion; see https://docs.victoriametrics.com/victorialogs/data-ingestion/ ; see also -logNewStreams
  -logNewStreams
    	Whether to log creation of new streams; this can be useful for debugging of high cardinality issues with log streams; see https://docs.victoriametrics.com/victorialogs/keyconcepts/#stream-fields ; see also -logIngestedRows
  -logNewStreamsAuthKey value
    	authKey, which must be passed in query string to /internal/log_new_streams . It overrides -httpAuth.* . See https://docs.victoriametrics.com/victorialogs/#logging-new-streams
    	Flag value can be read from the given file when using -logNewStreamsAuthKey=file:///abs/path/to/file or -logNewStreamsAuthKey=file://./relative/path/to/file.
    	Flag value can be read from the given http/https url when using -logNewStreamsAuthKey=http://host/path or -logNewStreamsAuthKey=https://host/path
  -loggerDisableTimestamps
    	Whether to disable writing timestamps in logs
  -loggerErrorsPerSecondLimit int
    	Per-second limit on the number of ERROR messages. If more than the given number of errors are emitted per second, the remaining errors are suppressed. Zero values disable the rate limit
  -loggerFormat string
    	Format for logs. Possible values: default, json (default "default")
  -loggerJSONFields string
    	Allows renaming fields in JSON formatted logs. Example: "ts:timestamp,msg:message" renames "ts" to "timestamp" and "msg" to "message". Supported fields: ts, level, caller, msg
  -loggerLevel string
    	Minimum level of errors to log. Possible values: INFO, WARN, ERROR, FATAL, PANIC (default "INFO")
  -loggerMaxArgLen int
    	The maximum length of a single logged argument. Longer arguments are replaced with 'arg_start..arg_end', where 'arg_start' and 'arg_end' is prefix and suffix of the arg with the length not exceeding -loggerMaxArgLen / 2 (default 5000)
  -loggerOutput string
    	Output for the logs. Supported values: stderr, stdout (default "stderr")
  -loggerTimezone string
    	Timezone to use for timestamps in logs. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 or Local (default "UTC")
  -loggerWarnsPerSecondLimit int
    	Per-second limit on the number of WARN messages. If more than the given number of warns are emitted per second, then the remaining warns are suppressed. Zero values disable the rate limit
  -loki.disableMessageParsing
    	Whether to disable automatic parsing of JSON-encoded log fields inside Loki log message into distinct log fields; see https://docs.victoriametrics.com/victorialogs/data-ingestion/promtail/#parsing-log-message
  -loki.maxRequestSize size
    	The maximum size in bytes of a single Loki request
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
  -loki.messageFieldsPrefix string
    	Optional prefix to add to field names parsed from JSON-encoded log message at Loki protocol; this can be used for avoiding potential clash between the parsed field names and the log stream labels; see https://docs.victoriametrics.com/victorialogs/data-ingestion/promtail/#parsing-log-message
  -maxBackfillAge value
    	Log entries with timestamps older than now-maxBackfillAge are rejected during data ingestion; see https://docs.victoriametrics.com/victorialogs/#backfilling
    	The following optional suffixes are supported: s (second), h (hour), d (day), w (week), M (month), y (year). If suffix isn't set, then the duration is counted in months (default 0)
  -maxConcurrentInserts int
    	The maximum number of concurrent insert requests. Set higher value when clients send data over slow networks. Default value depends on the number of available CPU cores. It should work fine in most cases since it minimizes resource usage. See also -insert.maxQueueDuration (default 128 = 2x CPU cores)
  -memory.allowedBytes size
    	Allowed size of system memory VictoriaMetrics caches may occupy. This option overrides -memory.allowedPercent if set to a non-zero value. Too low a value may increase the cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache resulting in higher disk IO usage. The process may behave unexpectedly if this flag is set too small (e.g., 1 byte).
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
  -memory.allowedPercent float
    	Allowed percent of system memory VictoriaMetrics caches may occupy. See also -memory.allowedBytes. Too low a value may increase cache miss rate usually resulting in higher CPU and disk IO usage. Too high a value may evict too much data from the OS page cache which will result in higher disk IO usage (default 60)
  -metrics.exposeMetadata
    	Whether to expose TYPE and HELP metadata at the /metrics page, which is exposed at -httpListenAddr . The metadata may be needed when the /metrics page is consumed by systems, which require this information. For example, Managed Prometheus in Google Cloud - https://cloud.google.com/stackdriver/docs/managed-prometheus/troubleshooting#missing-metric-type
  -metricsAuthKey value
    	Auth key for /metrics endpoint. It must be passed via authKey query arg. It overrides -httpAuth.*
    	Flag value can be read from the given file when using -metricsAuthKey=file:///abs/path/to/file or -metricsAuthKey=file://./relative/path/to/file.
    	Flag value can be read from the given http/https url when using -metricsAuthKey=http://host/path or -metricsAuthKey=https://host/path
  -nativeinsert.maxRequestSize size
    	The maximum size in bytes of a single request, which can be accepted at /insert/native and /insert/multitenant/native HTTP endpoints
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
  -opentelemetry.maxRequestSize size
    	The maximum size in bytes of a single OpenTelemetry request
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
  -partitionManageAuthKey value
    	authKey, which must be passed in query string to /internal/partition/* . It overrides -httpAuth.* . See https://docs.victoriametrics.com/victorialogs/#partitions-lifecycle
    	Flag value can be read from the given file when using -partitionManageAuthKey=file:///abs/path/to/file or -partitionManageAuthKey=file://./relative/path/to/file.
    	Flag value can be read from the given http/https url when using -partitionManageAuthKey=http://host/path or -partitionManageAuthKey=https://host/path
  -pprofAuthKey value
    	Auth key for /debug/pprof/* endpoints. It must be passed via authKey query arg. It overrides -httpAuth.*
    	Flag value can be read from the given file when using -pprofAuthKey=file:///abs/path/to/file or -pprofAuthKey=file://./relative/path/to/file.
    	Flag value can be read from the given http/https url when using -pprofAuthKey=http://host/path or -pprofAuthKey=https://host/path
  -pushmetrics.disableCompression
    	Whether to disable request body compression when pushing metrics to every -pushmetrics.url
  -pushmetrics.extraLabel array
    	Optional labels to add to metrics pushed to every -pushmetrics.url . For example, -pushmetrics.extraLabel='instance="foo"' adds instance="foo" label to all the metrics pushed to every -pushmetrics.url
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -pushmetrics.header array
    	Optional HTTP request header to send to every -pushmetrics.url . For example, -pushmetrics.header='Authorization: Basic foobar' adds 'Authorization: Basic foobar' header to every request to every -pushmetrics.url
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -pushmetrics.interval duration
    	Interval for pushing metrics to every -pushmetrics.url (default 10s)
  -pushmetrics.url array
    	Optional URL to push metrics exposed at /metrics page. See https://docs.victoriametrics.com/victoriametrics/single-server-victoriametrics/#push-metrics . By default, metrics exposed at /metrics page aren't pushed to any remote storage
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -retention.maxDiskSpaceUsageBytes size
    	The maximum disk space usage at -storageDataPath before older per-day partitions are automatically dropped; see https://docs.victoriametrics.com/victorialogs/#retention-by-disk-space-usage ; see also -retentionPeriod
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 0)
  -retention.maxDiskUsagePercent int
    	The maximum allowed disk usage percentage (1-100) for the filesystem that contains -storageDataPath before older per-day partitions are automatically dropped; mutually exclusive with -retention.maxDiskSpaceUsageBytes; see https://docs.victoriametrics.com/victorialogs/#percentage-based-disk-space-limit
  -retentionPeriod value
    	Log entries with timestamps older than now-retentionPeriod are automatically deleted; log entries with timestamps outside the retention are also rejected during data ingestion; the minimum supported retention is 1d (one day); see https://docs.victoriametrics.com/victorialogs/#retention ; see also -retention.maxDiskSpaceUsageBytes and -retention.maxDiskUsagePercent
    	The following optional suffixes are supported: s (second), h (hour), d (day), w (week), M (month), y (year). If suffix isn't set, then the duration is counted in months (default 7d)
  -search.allowPartialResponse
    	Whether to allow returning partial responses when some of vlstorage nodes from the -storageNode list are unavailable for querying. This flag works only for cluster setup of VictoriaLogs. See https://docs.victoriametrics.com/victorialogs/querying/#partial-responses
  -search.logSlowQueryDuration duration
    	Log queries with execution time exceeding this value. Zero disables slow query logging (default 5s)
  -search.maxConcurrentRequests int
    	The maximum number of concurrent search requests. It shouldn't be high, since a single request can saturate all the CPU cores, while many concurrently executed requests may require high amounts of memory. See also -search.maxQueueDuration (default 16 = 2x CPU cores when there are 4 or fewer; otherwise CPU cores, capped at 16)
  -search.maxQueryDuration duration
    	The maximum duration for query execution. It can be overridden to a smaller value on a per-query basis via 'timeout' query arg (default 30s)
  -search.maxQueryLen size
    	The maximum query length in bytes, which can be passed to /select/* endpoints
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 16384)
  -search.maxQueryTimeRange value
    	The maximum time range, which can be set in the query sent to querying APIs. Queries with bigger time ranges are rejected. See https://docs.victoriametrics.com/victorialogs/querying/#resource-usage-limits
    	The following unit suffixes are required: s (second), m (minute), h (hour), d (day), w (week), y (year). Bare numbers without units are not allowed (except 0) (default 0)
  -search.maxQueueDuration duration
    	The maximum time the search request waits for execution when -search.maxConcurrentRequests limit is reached; see also -search.maxQueryDuration (default 10s)
  -secret.flags array
    	Comma-separated list of flag names with secret values. Values for these flags are hidden in logs and on /metrics page
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -select.disable
    	Whether to disable both /select/* and /internal/select/* HTTP endpoints. Useful for dedicated vlinsert nodes. See also -internalselect.disable. See https://docs.victoriametrics.com/victorialogs/cluster/#security
  -select.disableCompression
    	Whether to disable compression for select query responses received from -storageNode nodes. Disabled compression reduces CPU usage at the cost of higher network usage
  -snapshotsMaxAge value
    	Snapshots are automatically deleted after the given duration if it is set to positive value. Make sure that the backup process has enough time for backing up the snapshot before its' deletion. See https://docs.victoriametrics.com/victorialogs/#how-to-remove-snapshots
    	The following optional suffixes are supported: s (second), h (hour), d (day), w (week), M (month), y (year). If suffix isn't set, then the duration is counted in months (default 3d)
  -splunk.ignoreFields array
    	Comma-separated list of fields to ignore for logs ingested over Splunk protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/splunk/#dropping-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -splunk.maxRequestSize size
    	The maximum size in bytes of a single Splunk request; see https://docs.victoriametrics.com/victorialogs/data-ingestion/splunk/
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 67108864)
  -splunk.msgField array
    	Field to use as a log message for logs ingested via Splunk protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/splunk/#message-field
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -splunk.preserveJSONKeys array
    	Comma-separated list of JSON keys that should be preserved from flattening when ingested via Splunk protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/splunk/ and https://docs.victoriametrics.com/victorialogs/keyconcepts/#data-model
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -splunk.streamFields array
    	Comma-separated list of fields to use as log stream fields for logs ingested over Splunk protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/splunk/#stream-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -splunk.tenantID string
    	TenantID for logs ingested via the Splunk endpoint. See https://docs.victoriametrics.com/victorialogs/data-ingestion/splunk/#multitenancy (default "0:0")
  -splunk.timeField string
    	Field to use as a log timestamp for logs ingested via Splunk protocol. See https://docs.victoriametrics.com/victorialogs/data-ingestion/splunk/#time-field (default "time")
  -storage.minFreeDiskSpaceBytes size
    	The minimum free disk space at -storageDataPath after which the storage stops accepting new data
    	Supports the following optional suffixes for size values: KB, MB, GB, TB, KiB, MiB, GiB, TiB (default 10000000)
  -storageDataPath string
    	Path to directory where to store VictoriaLogs data; see https://docs.victoriametrics.com/victorialogs/#storage (default "victoria-logs-data")
  -storageNode array
    	Comma-separated list of TCP addresses for storage nodes to route the ingested logs to and to send select queries to. If the list is empty, then the ingested logs are stored and queried locally from -storageDataPath
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.bearerToken array
    	Optional bearer auth token to use for the corresponding -storageNode
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.bearerTokenFile array
    	Optional path to bearer token file to use for the corresponding -storageNode. The token is re-read from the file every second
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.password array
    	Optional basic auth password to use for the corresponding -storageNode
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.passwordFile array
    	Optional path to basic auth password to use for the corresponding -storageNode. The file is re-read every second
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.tls array
    	Whether to use TLS (HTTPS) protocol for communicating with the corresponding -storageNode. By default communication is performed via HTTP
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -storageNode.tlsCAFile array
    	Optional path to TLS CA file to use for verifying connections to the corresponding -storageNode. By default, system CA is used
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.tlsCertFile array
    	Optional path to client-side TLS certificate file to use when connecting to the corresponding -storageNode
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.tlsInsecureSkipVerify array
    	Whether to skip tls verification when connecting to the corresponding -storageNode
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -storageNode.tlsKeyFile array
    	Optional path to client-side TLS certificate key to use when connecting to the corresponding -storageNode
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.tlsServerName array
    	Optional TLS server name to use for connections to the corresponding -storageNode. By default, the server name from -storageNode is used
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.username array
    	Optional basic auth username to use for the corresponding -storageNode
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -storageNode.usernameFile array
    	Optional path to basic auth username to use for the corresponding -storageNode. The file is re-read every second
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.compressMethod.tcp array
    	Compression method for syslog messages received at the corresponding -syslog.listenAddr.tcp. Supported values: none, gzip, deflate. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#compression
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.compressMethod.udp array
    	Compression method for syslog messages received at the corresponding -syslog.listenAddr.udp. Supported values: none, gzip, deflate. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#compression
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.compressMethod.unix array
    	Compression method for syslog messages received at the corresponding -syslog.listenAddr.unix. Supported values: none, gzip, deflate. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#compression
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.decolorizeFields.tcp array
    	Fields to remove ANSI color codes across logs ingested via the corresponding -syslog.listenAddr.tcp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#decolorizing-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.decolorizeFields.udp array
    	Fields to remove ANSI color codes across logs ingested via the corresponding -syslog.listenAddr.udp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#decolorizing-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.decolorizeFields.unix array
    	Fields to remove ANSI color codes across logs ingested via the corresponding -syslog.listenAddr.unix. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#decolorizing-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.extraFields.tcp array
    	Fields to add to logs ingested via the corresponding -syslog.listenAddr.tcp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#adding-extra-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.extraFields.udp array
    	Fields to add to logs ingested via the corresponding -syslog.listenAddr.udp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#adding-extra-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.extraFields.unix array
    	Fields to add to logs ingested via the corresponding -syslog.listenAddr.unix. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#adding-extra-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.ignoreFields.tcp array
    	Fields to ignore at logs ingested via the corresponding -syslog.listenAddr.tcp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#dropping-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.ignoreFields.udp array
    	Fields to ignore at logs ingested via the corresponding -syslog.listenAddr.udp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#dropping-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.ignoreFields.unix array
    	Fields to ignore at logs ingested via the corresponding -syslog.listenAddr.unix. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#dropping-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.listenAddr.tcp array
    	Comma-separated list of TCP addresses to listen to for Syslog messages. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.listenAddr.udp array
    	Comma-separated list of UDP addresses to listen to for Syslog messages. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.listenAddr.unix array
    	Comma-separated list of Unix socket filepaths to listen to for Syslog messages. Filepaths may be prepended with 'unixgram:'  for listening for SOCK_DGRAM sockets. By default SOCK_STREAM sockets are used. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.streamFields.tcp array
    	Fields to use as log stream labels for logs ingested via the corresponding -syslog.listenAddr.tcp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#stream-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.streamFields.udp array
    	Fields to use as log stream labels for logs ingested via the corresponding -syslog.listenAddr.udp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#stream-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.streamFields.unix array
    	Fields to use as log stream labels for logs ingested via the corresponding -syslog.listenAddr.unix. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#stream-fields
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.tenantID.tcp array
    	TenantID for logs ingested via the corresponding -syslog.listenAddr.tcp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#multitenancy
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.tenantID.udp array
    	TenantID for logs ingested via the corresponding -syslog.listenAddr.udp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#multitenancy
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.tenantID.unix array
    	TenantID for logs ingested via the corresponding -syslog.listenAddr.unix. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#multitenancy
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.timezone string
    	Timezone to use when parsing timestamps in RFC3164 syslog messages. Timezone must be a valid IANA Time Zone. For example: America/New_York, Europe/Berlin, Etc/GMT+3 . See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/ (default "Local")
  -syslog.tls array
    	Whether to enable TLS for receiving syslog messages at the corresponding -syslog.listenAddr.tcp. The corresponding -syslog.tlsCertFile and -syslog.tlsKeyFile must be set if -syslog.tls is set. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -syslog.tlsCertFile array
    	Path to file with TLS certificate for the corresponding -syslog.listenAddr.tcp if the corresponding -syslog.tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.tlsCipherSuites array
    	Optional list of TLS cipher suites for -syslog.listenAddr.tcp if -syslog.tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants . See also https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.tlsKeyFile array
    	Path to file with TLS key for the corresponding -syslog.listenAddr.tcp if the corresponding -syslog.tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -syslog.tlsMinVersion string
    	The minimum TLS version to use for -syslog.listenAddr.tcp if -syslog.tls is set. Supported values: TLS10, TLS11, TLS12, TLS13. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#security (default "TLS13")
  -syslog.useLocalTimestamp.tcp array
    	Whether to use local timestamp instead of the original timestamp for the ingested syslog messages at the corresponding -syslog.listenAddr.tcp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#log-timestamps
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -syslog.useLocalTimestamp.udp array
    	Whether to use local timestamp instead of the original timestamp for the ingested syslog messages at the corresponding -syslog.listenAddr.udp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#log-timestamps
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -syslog.useLocalTimestamp.unix array
    	Whether to use local timestamp instead of the original timestamp for the ingested syslog messages at the corresponding -syslog.listenAddr.unix. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#log-timestamps
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -syslog.useRemoteIP.tcp array
    	Whether to add remote ip address as 'remote_ip' log field for syslog messages ingested via the corresponding -syslog.listenAddr.tcp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#capturing-remote-ip-address
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -syslog.useRemoteIP.udp array
    	Whether to add remote ip address as 'remote_ip' log field for syslog messages ingested via the corresponding -syslog.listenAddr.udp. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#capturing-remote-ip-address
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -syslog.useRemoteIP.unix array
    	Whether to add remote ip address as 'remote_ip' log field for syslog messages ingested via the corresponding -syslog.listenAddr.unix. See https://docs.victoriametrics.com/victorialogs/data-ingestion/syslog/#capturing-remote-ip-address
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -tls array
    	Whether to enable TLS for incoming HTTP requests at the given -httpListenAddr (aka https). -tlsCertFile and -tlsKeyFile must be set if -tls is set. See also -mtls
    	Supports array of values separated by comma or specified via multiple flags.
    	Empty values are set to false.
  -tlsCertFile array
    	Path to file with TLS certificate for the corresponding -httpListenAddr if -tls is set. Prefer ECDSA certs instead of RSA certs as RSA certs are slower. The provided certificate file is automatically re-read every second, so it can be dynamically updated. See also -tlsAutocertHosts
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -tlsCipherSuites array
    	Optional list of TLS cipher suites for incoming requests over HTTPS if -tls is set. See the list of supported cipher suites at https://pkg.go.dev/crypto/tls#pkg-constants
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -tlsKeyFile array
    	Path to file with TLS key for the corresponding -httpListenAddr if -tls is set. The provided key file is automatically re-read every second, so it can be dynamically updated. See also -tlsAutocertHosts
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -tlsMinVersion array
    	Optional minimum TLS version to use for the corresponding -httpListenAddr if -tls is set. Supported values: TLS10, TLS11, TLS12, TLS13
    	Supports an array of values separated by comma or specified via multiple flags.
    	Each array item can contain comma inside single-quoted or double-quoted string, {}, [] and () braces.
  -version
    	Show VictoriaMetrics version
  -vmalert.proxyURL string
    	Optional URL for proxying requests to vmalert; see https://docs.victoriametrics.com/victorialogs/#vmalert