sd_bus_error(3)

.SH "NAME" sd_bus_error, SD_BUS_ERROR_MAKE_CONST, SD_BUS_ERROR_NULL, sd_bus_error_free, sd_bus_error_set, sd_bus_error_setf, sd_bus_error_setfv, sd_bus_error_set_const, sd_bus_error_set_errno, sd_bus_error_set_errnof, sd_bus_error_set_errnofv, sd_bus_error_get_errno, sd_bus_error_copy, sd_bus_error_move, sd_bus_error_is_set, sd_bus_error_has_name, sd_bus_error_has_names_sentinel, sd_bus_error_has_names - sd-bus error handling

.SH "SYNOPSIS"

#include <systemd/sd-bus.h>

typedef struct {


        const char *name;


        const char *message;


        ...
} sd_bus_error;

.PP SD_BUS_ERROR_MAKE_CONST(name, message)

.PP SD_BUS_ERROR_NULL

.HP 552u void sd_bus_error_free(sd_bus_error *e);

.HP 504u int sd_bus_error_set(sd_bus_error *e, const char *name, const char *message);

.HP 528u int sd_bus_error_setf(sd_bus_error *e, const char *name, const char *format, ...);

.HP 552u int sd_bus_error_setfv(sd_bus_error *e, const char *name, const char *format, va_list ap);

.HP 648u int sd_bus_error_set_const(sd_bus_error *e, const char *name, const char *message);

.HP 648u int sd_bus_error_set_errno(sd_bus_error *e, int error);

.HP 672u int sd_bus_error_set_errnof(sd_bus_error *e, int error, const char *format, ...);

.HP 696u int sd_bus_error_set_errnofv(sd_bus_error *e, int error, const char *format, va_list ap);

.HP 648u int sd_bus_error_get_errno(const sd_bus_error *e);

.HP 528u int sd_bus_error_copy(sd_bus_error *dst, const sd_bus_error *e);

.HP 528u int sd_bus_error_move(sd_bus_error *dst, sd_bus_error *e);

.HP 576u int sd_bus_error_is_set(const sd_bus_error *e);

.HP 624u int sd_bus_error_has_name(const sd_bus_error *e, const char *name);

.HP 864u int sd_bus_error_has_names_sentinel(const sd_bus_error *e, ...);

.PP #define sd_bus_error_has_names(e, ...) sd_bus_error_has_names_sentinel(e, ..., NULL)

.SH "DESCRIPTION"

.PP The sd_bus_error structure carries information about a D-Bus error condition, or lack thereof. The functions described below may be used to set and query fields in this structure.

An unset sd_bus_error structure should have both fields initialized to NULL, and signifies lack of an error, i.e. success. Assign SD_BUS_ERROR_NULL to the structure in order to initialize both fields to NULL. When no longer necessary, resources held by the sd_bus_error structure should be destroyed with sd_bus_error_free().

.PP sd_bus_error_set() sets an error structure to the specified name and message strings. The strings will be copied into internal, newly allocated memory. It is essential to free the contents again when they are not required anymore (see above). Do not use this call on error structures that have already been set. If you intend to reuse an error structure, free the old data stored in it with sd_bus_error_free() first.

.PP sd_bus_error_set() will return an errno-like value (see errno(3)) determined from the specified error name name. If name is NULL, it is assumed that no error occurred, and 0 is returned. If name is nonnull, a negative value is always returned. If e is NULL, no error structure is initialized, but name is still converted into an errno-style value.

.PP Various well-known D-Bus errors are converted to well-known errno counterparts, and the other ones to -EIO. See sd-bus-errors(3) for a list of well-known error names. Additional error mappings may be defined with sd_bus_error_add_map(3).

.PP sd_bus_error_set() is designed to be conveniently used in a return statement. If message is NULL, no message is set. This call can fail if no memory may be allocated for the name and message strings, in which case an SD_BUS_ERROR_NO_MEMORY error will be set instead and -ENOMEM returned.

.PP sd_bus_error_setf() and sd_bus_error_setfv() are similar to sd_bus_error_set(), but take a printf(3) format string and corresponding arguments to generate the message field. sd_bus_error_setf() uses variadic arguments, and sd_bus_error_setfv() accepts the arguments as a va_arg(3) parameter list.

.PP sd_bus_error_set_const() is similar to sd_bus_error_set(), but the string parameters are not copied internally, and must hence remain constant and valid for the lifetime of e. Use this call to avoid memory allocations when setting error structures. Since this call does not allocate memory, it will not fail with an out-of-memory condition as sd_bus_error_set() may, as described above. Alternatively, the SD_BUS_ERROR_MAKE_CONST() macro may be used to generate a literal, constant bus error structure on-the-fly.

.PP sd_bus_error_set_errno() will immediately return 0 if the specified error parameter error is 0. Otherwise, it will set name from an errno-like value that is converted to a D-Bus error. strerror_r(3) will be used to set message. Well-known D-Bus error names will be used for name if applicable, otherwise a name in the System.Error. namespace will be generated. The sign of the specified error number is ignored and the absolute value is used implicitly. If the specified error error is non-zero, the call always returns a negative value, for convenient usage in return statements. This call might fail due to lack of memory, in which case an SD_BUS_ERROR_NO_MEMORY error is set instead, and -ENOMEM is returned.

.PP sd_bus_error_set_errnof() and sd_bus_error_set_errnofv() are similar to sd_bus_error_set_errno(), but in addition to error, take a printf(3) format string and corresponding arguments. The message field will be generated from format and the arguments. sd_bus_error_set_errnof() uses variadic arguments, and sd_bus_error_set_errnofv() accepts the arguments as a va_arg(3) parameter list.

.PP sd_bus_error_get_errno() converts the name field of an error structure to an errno-like (positive) value using the same rules as sd_bus_error_set(). If e is NULL, 0 will be returned.

.PP sd_bus_error_copy() will initialize dst using the values in e, if e has been set with an error value before. Otherwise, it will return immediately. If the strings in e were set using sd_bus_error_set_const(), they will be shared. Otherwise, they will be copied. Before this call, dst must be unset, i.e. either freshly initialized with NULL or reset using sd_bus_error_free().

.PP sd_bus_error_copy() generally returns 0 or a negative errno-like value based on the input parameter e: 0 if it was unset and a negative integer if it was set to some error, similarly to sd_bus_error_set(). It may however also return an error generated internally, for example -ENOMEM if a memory allocation fails.

.PP sd_bus_error_move() is similar to sd_bus_error_copy(), but will move any error information from e into dst, resetting the former. This function cannot fail, as no new memory is allocated. Note that if e is not set, dst is initialized to SD_BUS_ERROR_NULL. Moreover, if dst is NULL no operation is executed on it and resources held by e are freed and reset. Returns a converted errno-like, non-positive error value.

.PP sd_bus_error_is_set() will return a non-zero value if e is non-NULL and an error has been set, false otherwise.

.PP sd_bus_error_has_name() will return a non-zero value if e is non-NULL and an error with the same name has been set, false otherwise.

.PP sd_bus_error_has_names_sentinel() is similar to sd_bus_error_has_name(), but takes multiple names to check against. The list must be terminated with NULL. sd_bus_error_has_names() is a macro wrapper around sd_bus_error_has_names_sentinel() that adds the NULL sentinel automatically.

.PP sd_bus_error_free() will destroy resources held by e. The parameter itself will not be deallocated, and must be free(3)d by the caller if necessary. The function may also be called safely on unset errors (error structures with both fields set to NULL), in which case it performs no operation. This call will reset the error structure after freeing the data, so that all fields are set to NULL. The structure may be reused afterwards.

.SH "REFERENCE OWNERSHIP"

.PP sd_bus_error is not reference-counted. Users should destroy resources held by it by calling sd_bus_error_free(). Usually, error structures are allocated on the stack or passed in as function parameters, but they may also be allocated dynamically, in which case it is the duty of the caller to free(3) the memory held by the structure itself after freeing its contents with sd_bus_error_free().

.SH "RETURN VALUE"

.PP The functions sd_bus_error_set(), sd_bus_error_setf(), and sd_bus_error_set_const() always return 0 when the specified error value is NULL, and a negative errno-like value corresponding to the name parameter otherwise. The functions sd_bus_error_set_errno(), sd_bus_error_set_errnof() and sd_bus_error_set_errnofv(), return 0 when the specified error value is 0, and a negative errno-like value corresponding to the error parameter otherwise. If an error occurs internally, one of the negative error values listed below will be returned. This allows those functions to be conveniently used in a return statement, see the example below.

.PP sd_bus_error_get_errno() returns false when e is NULL, and a positive errno value mapped from e->name otherwise.

.PP sd_bus_error_copy() and sd_bus_error_move() return a negative error value converted from the source error, and zero if the error has not been set. This allows those functions to be conveniently used in a return statement, see the example below.

.PP sd_bus_error_is_set() returns a non-zero value when e and the name field are non-NULL, zero otherwise.

.PP sd_bus_error_has_name(), sd_bus_error_has_names(), and sd_bus_error_has_names_sentinel() return a non-zero value when e is non-NULL and the name field is equal to one of the given names, zero otherwise.

.SS "Errors"

.PP Return value may indicate the following problems in the invocation of the function itself:

.PP -EINVAL

/* SPDX-License-Identifier: MIT-0 */
#include <errno.h>
#include <string.h>
#include <unistd.h>
#include <systemd/sd-bus.h>
int writer_with_negative_errno_return(int fd, sd_bus_error *error) {


  const char *message = "Hello, World!\n";


  ssize_t n = write(fd, message, strlen(message));


  if (n >= 0)


    return n; /* On success, return the number of bytes written, possibly 0. */


  /* On error, initialize the error structure, and also propagate the errno


   * value that write(2) set for us. */


  return sd_bus_error_set_errnof(error, errno, "Failed to write to fd %i: %s", fd, strerror(errno));
}