| SYSTEMD-INHIBIT(1) | systemd-inhibit | SYSTEMD-INHIBIT(1) |
.SH "NAME" systemd-inhibit - Execute a program with an inhibition
lock taken
.SH "SYNOPSIS"
.HP 384u
systemd-inhibit [OPTIONS...] [COMMAND] [ARGUMENTS...]
.HP 384u
systemd-inhibit [OPTIONS...] [--list]
.SH "DESCRIPTION"
.PP systemd-inhibit may be used to execute a program with a shutdown,
sleep, or idle inhibitor lock taken. The lock will be acquired before the
specified command line is executed and released afterwards.
.PP Inhibitor locks may be used to block or delay system sleep and shutdown
requests from the user, as well as automatic idle handling of the OS. This
is useful to avoid system suspends while an optical disc is being recorded,
or similar operations that should not be interrupted.
.PP For more information see Inhibitor Locks[1].
.SH "OPTIONS"
.PP The following options are understood:
.PP --what=
Takes a colon-separated list of one or more operations to inhibit: shutdown,
sleep, idle, handle-power-key, handle-reboot-key, handle-suspend-key,
handle-hibernate-key, handle-lid-switch, for inhibiting
reboot/power-off/halt/kexec/soft-reboot, suspending/hibernating, the
automatic idle detection, or the low-level handling of the
power/reboot/sleep key and the lid switch, respectively. If omitted,
defaults to idle:sleep:shutdown.
.RE
.PP --who=
Takes a short, human-readable descriptive string for the program taking the
lock. If not passed, defaults to the command line string.
.RE
.PP --why=
Takes a short, human-readable descriptive string for the reason for taking
the lock. Defaults to "Unknown reason".
.RE
.PP --mode=
Takes block, delay, or block-weak and describes how the lock is applied. If
block is used (the default), the lock prohibits any of the requested
operations without time limit, and only privileged users may override it.
The block-weak inhibitor lock type is similar to block but is not enforced
against operations initiated by privileged clients or those owned by the
user that also owns the inhibitor lock. If delay is used, the lock can only
delay the requested operations for a limited time. If the time elapses, the
lock is ignored and the operation executed. The time limit may be specified
in logind.conf(5). Note that delay is only available for sleep and
shutdown.
.RE
.PP --list
Lists all active inhibition locks instead of acquiring one. It can be
filtered using --what=, --who=, --why=, or
--mode=.
.RE
.PP --no-ask-password
Do not query the user for authentication for privileged operations.
.RE
.PP --no-pager
Do not pipe output into a pager.
.RE
.PP --no-legend
Do not print the legend, i.e. column headers and the footer with hints.
.RE
.PP --json=MODE
Shows output formatted as JSON. Expects one of short (for the shortest
possible output without any redundant whitespace or line breaks), pretty
(for a pretty version of the same, with indentation and line breaks) or off
(to turn off JSON output, the default).
.RE
.PP -h, --help
Print a short help text and exit.
.RE
.PP --version
Print a short version string and exit.
.RE
.SH "EXIT STATUS"
.PP Returns the exit status of the executed program.
.SH "EXAMPLE"
# systemd-inhibit wodim foobar.iso
.PP This burns the ISO image foobar.iso on a CD using wodim(1), and
inhibits system sleeping, shutdown and idle while doing so.
.SH "ENVIRONMENT"
.PP $SYSTEMD_LOG_LEVEL
The maximum log level of emitted messages (messages with a higher log level,
i.e. less important ones, will be suppressed). Takes a comma-separated list
of values. A value may be either one of (in order of decreasing importance)
emerg, alert, crit, err, warning,
notice, info, debug, or an integer in the range 0...7.
See syslog(3) for more information. Each value may optionally be
prefixed with one of console, syslog, kmsg or
journal followed by a colon to set the maximum log level for that
specific log target (e.g. SYSTEMD_LOG_LEVEL=debug,console:info
specifies to log at debug level except when logging to the console which
should be at info level). Note that the global maximum log level takes
priority over any per target maximum log levels.
.RE
.PP $SYSTEMD_LOG_COLOR
A boolean. If true, messages written to the tty will be colored according to
priority.
This setting is only useful when messages are written directly to the
terminal, because journalctl(1) and other tools that display logs
will color messages based on the log level on their own.
.RE
.PP $SYSTEMD_LOG_TIME
A boolean. If true, console log messages will be prefixed with a
timestamp.
This setting is only useful when messages are written directly to the
terminal or a file, because journalctl(1) and other tools that
display logs will attach timestamps based on the entry metadata on their
own.
.RE
.PP $SYSTEMD_LOG_LOCATION
A boolean. If true, messages will be prefixed with a filename and line number
in the source code where the message originates.
Note that the log location is often attached as metadata to journal entries
anyway. Including it directly in the message text can nevertheless be
convenient when debugging programs.
.RE
.PP $SYSTEMD_LOG_TID
A boolean. If true, messages will be prefixed with the current numerical
thread ID (TID).
Note that the this information is attached as metadata to journal entries
anyway. Including it directly in the message text can nevertheless be
convenient when debugging programs.
.RE
.PP $SYSTEMD_LOG_TARGET
The destination for log messages. One of console (log to the attached
tty), console-prefixed (log to the attached tty but with prefixes
encoding the log level and "facility", see syslog(3),
kmsg (log to the kernel circular log buffer), journal (log to
the journal), journal-or-kmsg (log to the journal if available, and
to kmsg otherwise), auto (determine the appropriate log target
automatically, the default), null (disable log output).
.RE
.PP $SYSTEMD_LOG_RATELIMIT_KMSG
Whether to ratelimit kmsg or not. Takes a boolean. Defaults to true. If
disabled, systemd will not ratelimit messages written to kmsg.
.RE
.PP $SYSTEMD_PAGER, $PAGER
Pager to use when --no-pager is not given. $SYSTEMD_PAGER is
used if set; otherwise $PAGER is used. If neither
$SYSTEMD_PAGER nor $PAGER are set, a set of well-known pager
implementations is tried in turn, including less(1) and
more(1), until one is found. If no pager implementation is
discovered, no pager is invoked. Setting those environment variables to an
empty string or the value cat is equivalent to passing
--no-pager.
Note: if $SYSTEMD_PAGERSECURE is not set, $SYSTEMD_PAGER and
$PAGER can only be used to disable the pager (with cat or ), and are
otherwise ignored.
.RE
.PP $SYSTEMD_LESS
Override the options passed to less (by default FRSXMK).
Users might want to change two options in particular:
.PP K
This option instructs the pager to exit immediately when Ctrl+C is pressed.
To allow less to handle Ctrl+C itself to switch back to the pager
command prompt, unset this option.
If the value of $SYSTEMD_LESS does not include K, and the pager that
is invoked is less, Ctrl+C will be ignored by the executable, and
needs to be handled by the pager.
.RE
.PP X
This option instructs the pager to not send termcap initialization and
deinitialization strings to the terminal. It is set by default to allow
command output to remain visible in the terminal even after the pager exits.
Nevertheless, this prevents some pager functionality from working, in
particular paged output cannot be scrolled with the mouse.
.RE
.sp
Note that setting the regular $LESS environment variable has no effect
for less invocations by systemd tools.
See less(1) for more discussion.
.RE
.PP $SYSTEMD_LESSCHARSET
Override the charset passed to less (by default utf-8, if the invoking
terminal is determined to be UTF-8 compatible).
Note that setting the regular $LESSCHARSET environment variable has no
effect for less invocations by systemd tools.
.RE
.PP $SYSTEMD_PAGERSECURE
Common pager commands like less(1), in addition to "paging",
i.e. scrolling through the output, support opening of or writing to other
files and running arbitrary shell commands. When commands are invoked with
elevated privileges, for example under sudo(8) or pkexec(1),
the pager becomes a security boundary. Care must be taken that only programs
with strictly limited functionality are used as pagers, and unintended
interactive features like opening or creation of new files or starting of
subprocesses are not allowed. "Secure mode" for the pager may be
enabled as described below, if the pager supports that (most pagers
are not written in a way that takes this into consideration). It is
recommended to either explicitly enable "secure mode" or to
completely disable the pager using --no-pager or PAGER=cat
when allowing untrusted users to execute commands with elevated
privileges.
This option takes a boolean argument. When set to true, the "secure
mode" of the pager is enabled. In "secure mode",
LESSSECURE=1 will be set when invoking the pager, which instructs the
pager to disable commands that open or create new files or start new
subprocesses. Currently only less(1) is known to understand this
variable and implement "secure mode".
When set to false, no limitation is placed on the pager. Setting
SYSTEMD_PAGERSECURE=0 or not removing it from the inherited
environment may allow the user to invoke arbitrary commands.
When $SYSTEMD_PAGERSECURE is not set, systemd tools attempt to
automatically figure out if "secure mode" should be enabled and
whether the pager supports it. "Secure mode" is enabled if the
effective UID is not the same as the owner of the login session, see
geteuid(2) and sd_pid_get_owner_uid(3), or when running under
sudo(8) or similar tools ($SUDO_UID is set [2]). In those
cases, SYSTEMD_PAGERSECURE=1 will be set and pagers which are not
known to implement "secure mode" will not be used at all. Note
that this autodetection only covers the most common mechanisms to elevate
privileges and is intended as convenience. It is recommended to explicitly
set $SYSTEMD_PAGERSECURE or disable the pager.
Note that if the $SYSTEMD_PAGER or $PAGER variables are to be
honoured, other than to disable the pager, $SYSTEMD_PAGERSECURE must
be set too.
.RE
.PP $SYSTEMD_COLORS
Takes a boolean argument, or a special value. By default (unset),
systemd and related utilities will use colors in their output if
possible. If $COLORTERM is set to truecolor or 24bit, 24-bit colors
will be enabled, 256 colors otherwise, unless $NO_COLOR or
$TERM indicates colors are disabled.
.PP true
Same as unset, except that $NO_COLOR is ignored.
.RE
.PP false
The output will be monochrome.
.RE
.PP 16, 256, 24bit
Always use the base 16 ANSI colors, 256 colors, or 24 bit color,
respectively.
.RE
.PP auto-16, auto-256, auto-24bit
Use the given quantity of colours, subject to $TERM, and what the
console is connected to.
.RE
.sp
.RE
.PP $SYSTEMD_URLIFY
The value must be a boolean. Controls whether clickable links should be
generated in the output for terminal emulators supporting this. This can be
specified to override the decision that systemd makes based on
$TERM and other conditions.
.RE
.SH "SEE ALSO"
.PP systemd(1), logind.conf(5)
NOTES
- 1.
- Inhibitor Locks
- 2.
-
It is recommended for other tools to set and check $SUDO_UID as appropriate, treating it is a common interface.
| systemd 262.2 |