xml2dcm(1) OFFIS DCMTK xml2dcm(1) # [NAME](#NAME) xml2dcm - Convert XML document to DICOM file or data set # [SYNOPSIS](#SYNOPSIS) ``` xml2dcm [options] xmlfile-in dcmfile-out ``` # [DESCRIPTION](#DESCRIPTION) The **xml2dcm** utility converts the contents of an XML (Extensible Markup Language) document to DICOM file or data set. The XML document is expected to validate against the DTD (Document Type Definition) which is described in file *dcm2xml.dtd*. An appropriate XML file can be created using the **dcm2xml** tool (option *+Wb* recommended to include binary data). # [PARAMETERS](#PARAMETERS) ``` xmlfile-in XML input filename to be converted ("-" for stdin) dcmfile-out DICOM output filename ("-" for stdout) ``` # [OPTIONS](#OPTIONS) ## [general options](#general_options) ``` -h --help print this help text and exit --version print version information and exit --arguments print expanded command line arguments -q --quiet quiet mode, print no warnings and errors -v --verbose verbose mode, print processing details -d --debug debug mode, print debug information -ll --log-level [l]evel: string constant (fatal, error, warn, info, debug, trace) use level l for the logger -lc --log-config [f]ilename: string use config file f for the logger ``` ## [input options](#input_options) ``` input file format: +f --read-meta-info read meta information if present (default) -f --ignore-meta-info ignore file meta information ``` ## [processing options](#processing_options) ``` validation: +Vd --validate-document validate XML document against DTD +Vn --check-namespace check XML namespace in document root unique identifiers: +Ug --generate-new-uids generate new Study/Series/SOP Instance UID -Uo --dont-overwrite-uids do not overwrite existing UIDs (default) +Uo --overwrite-uids overwrite existing UIDs ``` ## [output options](#output_options) ``` output file format: +F --write-file write file format (default) -F --write-dataset write data set without file meta information +Fu --update-meta-info update particular file meta information output transfer syntax: +t= --write-xfer-same write with same TS as input (default) +te --write-xfer-little write with explicit VR little endian TS +tb --write-xfer-big write with explicit VR big endian TS +ti --write-xfer-implicit write with implicit VR little endian TS +td --write-xfer-deflated write with deflated explicit VR little endian TS error handling: -E --stop-on-error do not write if document is invalid (default) +E --ignore-errors attempt to write even if document is invalid post-1993 value representations: +u --enable-new-vr enable support for new VRs (UN/UT) (default) -u --disable-new-vr disable support for new VRs, convert to OB group length encoding: +g= --group-length-recalc recalculate group lengths if present (default) +g --group-length-create always write with group length elements -g --group-length-remove always write without group length elements length encoding in sequences and items: +e --length-explicit write with explicit lengths (default) -e --length-undefined write with undefined lengths data set trailing padding (not with --write-dataset): -p= --padding-retain do not change padding (default if not --write-dataset) -p --padding-off no padding (implicit if --write-dataset) +p --padding-create [f]ile-pad [i]tem-pad: integer align file on multiple of f bytes and items on multiple of i bytes deflate compression level (only with --write-xfer-deflated): +cl --compression-level [l]evel: integer (default: 6) 0=uncompressed, 1=fastest, 9=best compression ``` # [NOTES](#NOTES) The basic structure of the XML input expected looks like the following: ``` 166 ... OFFIS_DCMTK_353 ISO_IR 100 ... 256 8 ... ... ... ``` The 'file-format' and 'meta-header' tags may be absent for DICOM data sets. ## [Character Encoding](#Character_Encoding) The DICOM character encoding is determined automatically from the element with tag '0008,0005' (Specific Character Set) - if present. The following character sets are currently supported (requires **libxml** to include **iconv** support, see *--version* output): ``` ASCII (ISO_IR 6) (UTF-8) UTF-8 "ISO_IR 192" (UTF-8) ISO Latin 1 "ISO_IR 100" (ISO-8859-1) ISO Latin 2 "ISO_IR 101" (ISO-8859-2) ISO Latin 3 "ISO_IR 109" (ISO-8859-3) ISO Latin 4 "ISO_IR 110" (ISO-8859-4) ISO Latin 5 "ISO_IR 148" (ISO-8859-9) ISO Latin 9 "ISO_IR 203" (ISO-8859-15) Cyrillic "ISO_IR 144" (ISO-8859-5) Arabic "ISO_IR 127" (ISO-8859-6) Greek "ISO_IR 126" (ISO-8859-7) Hebrew "ISO_IR 138" (ISO-8859-8) ``` Multiple character sets are not supported (only the first value of the 'Specific Character Set' is used for the character encoding in case of value multiplicity). See **dcm2xml** documentation for more details on the XML structure. ## [Binary Data](#Binary_Data) Binary data (\*) can be encoded either as a sequence of hex numbers separated by a backslash '\\' or in Base64 format (binary='base64'). In addition, binary data can also be read from file (binary='file'). In this case, the filename has to be specified as the element value, e.g. ``` subdir/pixeldata.raw ``` Please note that the contents of the file will be read as is. OW data is expected to be little endian ordered and will be swapped if necessary. No checks will be made to ensure that the amount of data is reasonable in terms of other attributes such as Rows or Columns. (\*) Please note that currently only OB and OW data is supported, i.e. element values with a VR of OD, OF, OL and OV are not regarded as 'binary data' and treated as all other VRs. ## [Compression](#Compression) If libxml is compiled with zlib support, the input file (*xmlfile-in*) can also be compressed with ZIP, which usually results in much smaller files. See output of option *--version* in order to check whether zlib support is available. ## [Limitations](#Limitations) Different versions of libxml might have different limits for the maximum length of an XML element value. Therefore, it should be avoided to use very long element values (e.g. for pixel data). Please note that **xml2dcm** currently does not fully support DICOMDIR files. Specifically, the value of the various offset data elements is not updated automatically by this tool. # [LOGGING](#LOGGING) The level of logging output of the various command line tools and underlying libraries can be specified by the user. By default, only errors and warnings are written to the standard error stream. Using option *--verbose* also informational messages like processing details are reported. Option *--debug* can be used to get more details on the internal activity, e.g. for debugging purposes. Other logging levels can be selected using option *--log-level*. In *--quiet* mode only fatal errors are reported. In such very severe error events, the application will usually terminate. For more details on the different logging levels, see documentation of module 'oflog'. In case the logging output should be written to file (optionally with logfile rotation), to syslog (Unix) or the event log (Windows) option *--log-config* can be used. This configuration file also allows for directing only certain messages to a particular output stream and for filtering certain messages based on the module or application where they are generated. An example configuration file is provided in *<etcdir>/logger.cfg*. # [COMMAND LINE](#COMMAND_LINE) All command line tools use the following notation for parameters: square brackets enclose optional values (0-1), three trailing dots indicate that multiple values are allowed (1-n), a combination of both means 0 to n values. Command line options are distinguished from parameters by a leading '+' or '-' sign, respectively. Usually, order and position of command line options are arbitrary (i.e. they can appear anywhere). However, if options are mutually exclusive the rightmost appearance is used. This behavior conforms to the standard evaluation rules of common Unix shells. In addition, one or more command files can be specified using an '@' sign as a prefix to the filename (e.g. *@command.txt*). Such a command argument is replaced by the content of the corresponding text file (multiple whitespaces are treated as a single separator unless they appear between two quotation marks) prior to any further evaluation. Please note that a command file cannot contain another command file. This simple but effective approach allows one to summarize common combinations of options/parameters and avoids longish and confusing command lines (an example is provided in file *<datadir>/dumppat.txt*). # [ENVIRONMENT](#ENVIRONMENT) The **xml2dcm** utility will attempt to load DICOM data dictionaries specified in the *DCMDICTPATH* environment variable. By default, i.e. if the *DCMDICTPATH* environment variable is not set, the file *<datadir>/dicom.dic* will be loaded unless the dictionary is built into the application (default for Windows). The default behavior should be preferred and the *DCMDICTPATH* environment variable only used when alternative data dictionaries are required. The *DCMDICTPATH* environment variable has the same format as the Unix shell *PATH* variable in that a colon (':') separates entries. On Windows systems, a semicolon (';') is used as a separator. The data dictionary code will attempt to load each file specified in the *DCMDICTPATH* environment variable. It is an error if no data dictionary can be loaded. # [FILES](#FILES) *<datadir>/dcm2xml.dtd* - Document Type Definition (DTD) file # [SEE ALSO](#SEE_ALSO) [**dcm2xml**(1)](/man/os/dcmtk/dcm2xml.1) # [COPYRIGHT](#COPYRIGHT) Copyright (C) 2003-2025 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany. Mon Dec 15 2025 Version 3.7.0 --- Document: xml2dcm(1) from dcmtk 3.7.0-r7 (Chainguard OS) Source: https://github.com/DCMTK/dcmtk