usage: kissat [ <option> ... ] [ <dimacs> [ <proof> ] ]

where '<option>' is one of the following common options:

  --help  print this list of all command line options
  -h      print only reduced list of command line options

  -f      force writing proofs (to existing CNF alike file)
  -n      do not print satisfying assignment

  -q      suppress all messages (see also '--quiet')
  -s      print all statistics (see also '--statistics')
  -v      increase verbose level (see also '--verbose')

Further '<option>' can be one of the following less frequent options:

  --banner             print solver information
  --build              print build information
  --color              use colors (default if connected to terminal)
  --no-color           no colors (default if not connected to terminal)
  --compiler           print compiler information
  --copyright          print copyright information
  --force              same as '-f' (force writing proof)
  --id                 print 'git' identifier (SHA-1 hash)
  --range              print option range list
  --relaxed            relaxed parsing (ignore DIMACS header)
  --strict             stricter parsing (no empty header lines)
  --version            print version

The following solving limits can be enforced:

  --conflicts=<limit>
  --decisions=<limit>
  --time=<seconds>

Satisfying assignments have by default values for all variables
unless '--partial' is specified, then only values are printed
for variables which are necessary to satisfy the formula.

The following predefined 'configurations' (option settings) are supported:

  --basic    basic CDCL solving ('--plain' but no restarts, minimize, reduce)
  --default  default configuration
  --plain    plain CDCL solving without advanced techniques
  --sat      target satisfiable instances ('--target=2 --restartint=50')
  --unsat    target unsatisfiable instances ('--stable=0')

Or '<option>' is one of the following long options:

  --ands=<bool>              extract and eliminate and gates [true]
  --backbone=0..2            binary clause backbone (2=eager) [1]
  --backboneeffort=0..1e5    effort in per mille [20]
  --backbonemaxrounds=1...   maximum backbone rounds [1e3]
  --backbonerounds=1...      backbone rounds limit [100]
  --bigbigfraction=0..1e3    big binary clause fraction per mille [990]
  --bump=<bool>              enable variable bumping [true]
  --bumpreasons=<bool>       bump reason side literals too [true]
  --bumpreasonslimit=1...    relative reason literals limit [10]
  --bumpreasonsrate=1...     decision rate limit [10]
  --chrono=<bool>            allow chronological backtracking [true]
  --chronolevels=0...        maximum jumped over levels [100]
  --compact=<bool>           enable compacting garbage collection [true]
  --compactlim=0..100        compact inactive limit (in percent) [10]
  --congruence=<bool>        congruence closure on extracted gates [true]
  --congruenceandarity=2..5e7 AND gate arity limit [1e6]
  --congruenceands=<bool>    extract AND gates for congruence closure [true]
  --congruencebinaries=<bool> extract certain binary clauses [true]
  --congruenceites=<bool>    extract ITE gates for congruence closure [true]
  --congruenceonce=<bool>    congruence closure only initially [false]
  --congruencexorarity=2..20 congruence XOR gate arity limit [4]
  --congruencexorcounts=1... XOR counting rounds [2]
  --congruencexors=<bool>    extract XOR gates for congruence closure [true]
  --decay=1..200             per mille scores decay [50]
  --definitioncores=1..100   how many cores [2]
  --definitions=<bool>       extract general definitions [true]
  --definitionticks=0...     kitten ticks limits [1e6]
  --defraglim=50..100        usable defragmentation limit in percent [75]
  --defragsize=10...         size defragmentation limit [2^18]
  --eagersubsume=0..4        eagerly subsume previous learned clauses [4]
  --eliminate=<bool>         bounded variable elimination BVE [true]
  --eliminatebound=0..2^13   maximum elimination bound [16]
  --eliminateclslim=1...     elimination clause size limit [100]
  --eliminateeffort=0..2e3   effort in per mille [100]
  --eliminateinit=0...       initial elimination interval [500]
  --eliminateint=10...       base elimination interval [500]
  --eliminateocclim=0...     elimination occurrence limit [2e3]
  --eliminaterounds=1..1e4   elimination rounds limit [2]
  --emafast=10..1e6          fast exponential moving average window [33]
  --emaslow=100..1e6         slow exponential moving average window [1e5]
  --equivalences=<bool>      extract and eliminate equivalence gates [true]
  --extract=<bool>           extract gates in variable elimination [true]
  --factor=<bool>            bounded variable addition [true]
  --factorcandrounds=0...    candidates reduction rounds [2]
  --factordelay=0..12        delaying factor [4]
  --factoreffort=0..1e6      bounded variable effort in per mille [50]
  --factorhops=1..10         structural factoring heuristic hops [3]
  --factoriniticks=1..1e6    initial ticks ticks in millions [700]
  --factorsize=2...          bounded variable addition clause size [5]
  --factorstructural=<bool>  structural bounded variable addition [false]
  --fastel=<bool>            initial fast variable elimination [false]
  --fastelclslim=1...        fast elimination clause length limit [100]
  --fastelim=1..1e3          fast elimination resolvents limit [8]
  --fasteloccs=1..1e3        fast elimination occurrence limit [100]
  --fastelrounds=1..1e3      fast elimination rounds [4]
  --fastelsub=<bool>         forward subsuming fast variable elimination [true]
  --flushproof=<bool>        flush proof lines immediately [false]
  --focusedtiers=<bool>      always used focused mode tiers [true]
  --forcephase=<bool>        force initial phase [false]
  --forward=<bool>           forward subsumption in BVE [true]
  --forwardeffort=0..1e6     effort in per mille [100]
  --ifthenelse=<bool>        extract and eliminate if-then-else gates [true]
  --incremental=<bool>       enable incremental solving [false]
  --jumpreasons=<bool>       jump binary reasons [true]
  --lucky=<bool>             try some lucky assignments [true]
  --luckyearly=<bool>        lucky assignments before preprocessing [true]
  --luckylate=<bool>         lucky assignments after preprocessing [true]
  --mineffort=0...           minimum absolute effort in millions [10]
  --minimize=<bool>          learned clause minimization [true]
  --minimizedepth=1..1e6     minimization depth [1e3]
  --minimizeticks=<bool>     count ticks in minimize and shrink [true]
  --modeinit=10..1e8         initial focused conflicts limit [1e3]
  --modeint=10..1e8          focused conflicts interval [1e3]
  --otfs=<bool>              on-the-fly strengthening [true]
  --phase=<bool>             initial decision phase [true]
  --phasesaving=<bool>       enable phase saving [true]
  --preprocess=<bool>        initial preprocessing [true]
  --preprocessbackbone=<bool> backbone preprocessing [true]
  --preprocesscongruence=<bool> congruence preprocessing [true]
  --preprocessfactor=<bool>  variable addition preprocessing [true]
  --preprocessprobe=<bool>   probing preprocessing [true]
  --preprocessrounds=1...    initial preprocessing rounds [1]
  --preprocessweep=<bool>    sweep preprocessing [true]
  --probe=<bool>             enable probing [true]
  --probeinit=0...           initial probing interval [100]
  --probeint=2...            probing interval [100]
  --proberounds=1...         probing rounds [2]
  --profile=0..4             profile level [2]
  --promote=<bool>           promote clauses [true]
  --quiet=<bool>             disable all messages [false]
  --randec=<bool>            random decisions [true]
  --randecfocused=<bool>     random decisions in focused mode [true]
  --randecinit=0...          random decisions interval [500]
  --randecint=0...           initial random decisions interval [500]
  --randeclength=1...        random conflicts length [10]
  --randecstable=<bool>      random decisions in stable mode [false]
  --reduce=<bool>            learned clause reduction [true]
  --reducehigh=0..1e3        high reduce fraction per mille [900]
  --reduceinit=2..1e5        initial reduce interval [1e3]
  --reduceint=2..1e5         base reduce interval [1e3]
  --reducelow=0..1e3         low reduce fraction per mille [500]
  --reluctant=<bool>         stable reluctant doubling restarting [true]
  --reluctantint=2..2^15     reluctant interval [2^10]
  --reluctantlim=0..2^30     reluctant limit (0=unlimited) [2^20]
  --reorder=0..2             reorder decisions (1=stable-mode-only) [2]
  --reorderinit=0..1e5       initial reorder interval [1e4]
  --reorderint=1..1e5        base reorder interval [1e4]
  --reordermaxsize=2..2^8    reorder maximum clause size [100]
  --rephase=<bool>           reinitialization of decision phases [true]
  --rephaseinit=10..1e5      initial rephase interval [1e3]
  --rephaseint=10..1e5       base rephase interval [1e3]
  --restart=<bool>           enable restarts [true]
  --restartint=1..1e4        base restart interval [1]
  --restartmargin=0..25      fast/slow margin in percent [10]
  --restartreusetrail=<bool> restarts tries to reuse trail [true]
  --seed=0...                random seed [0]
  --shrink=0..3              learned clauses (1=bin,2=lrg,3=rec) [3]
  --simplify=<bool>          enable probing and elimination [true]
  --smallclauses=0...        small clauses limit [1e5]
  --stable=0..2              enable stable search mode [1]
  --statistics=<bool>        print complete statistics [false]
  --substitute=<bool>        equivalent literal substitution [true]
  --substituteeffort=1..1e3  effort in per mille [10]
  --substituterounds=1..100  maximum substitution rounds [2]
  --subsumeclslim=1...       subsumption clause size limit [1e3]
  --subsumeocclim=0...       subsumption occurrence limit [1e3]
  --sweep=<bool>             enable SAT sweeping [true]
  --sweepclauses=0...        environment clauses [2^10]
  --sweepcomplete=<bool>     run SAT sweeping until completion [false]
  --sweepdepth=0...          environment depth [2]
  --sweepeffort=0..1e4       effort in per mille [100]
  --sweepfliprounds=0...     flipping rounds [1]
  --sweepmaxclauses=2...     maximum environment clauses [2^15]
  --sweepmaxdepth=1...       maximum environment depth [3]
  --sweepmaxvars=2...        maximum environment variables [2^13]
  --sweeprand=<bool>         randomize sweeping environment [false]
  --sweepvars=0...           environment variables [2^8]
  --target=0..2              target phases (1=stable,2=focused) [1]
  --tier1=1..100             learned clause tier one glue limit [2]
  --tier1relative=0..1e3     relative tier one glue limit [500]
  --tier2=1..1e3             learned clause tier two glue limit [6]
  --tier2relative=0..1e3     relative tier two glue limit [900]
  --transitive=<bool>        transitive reduction of binary clauses [true]
  --transitiveeffort=0..2e3  effort in per mille [20]
  --transitivekeep=<bool>    keep transitivity candidates [true]
  --tumble=<bool>            tumbled external indices order [true]
  --verbose=0..3             verbosity level [0]
  --vivify=<bool>            vivify clauses [true]
  --vivifyeffort=0..1e3      effort in per mille [100]
  --vivifyfocusedtiers=<bool> use focused tier limits [true]
  --vivifyirr=0..100         relative irredundant effort [3]
  --vivifysort=<bool>        sort vivification candidates [true]
  --vivifytier1=0..100       relative tier1 effort [3]
  --vivifytier2=0..100       relative tier2 effort [3]
  --vivifytier3=0..100       relative tier3 effort [1]
  --walkeffort=0..1e6        effort in per mille [50]
  --walkinitially=<bool>     initial local search [false]
  --warmup=<bool>            initialize phases by unit propagation [true]

Furthermore '<dimacs>' is the input file in DIMACS format.
The solver reads from '<stdin>' if '<dimacs>' is unspecified.
If the path has a '.bz2', '.gz', '.lzma', '7z' or '.xz' suffix
then the solver tries to find a corresponding decompression
tool ('bzip2', 'gzip', 'lzma', '7z', or 'xz') to decompress
the input file on-the-fly after checking that the input file
has the correct format (starts with the corresponding
signature bytes).

If '<proof>' is specified then a proof trace is written to the
given file.  If the file name is '-' then the proof is written
to '<stdout>'. In this case the ASCII version of the DRAT format
is used.  For real files the binary proof format is used unless
'--no-binary' is specified.

Writing of compressed proof files follows the same principle
as reading compressed files. The compression format is based
on the file suffix and it is checked that the corresponding
compression utility can be found.