NVME-MICRON-NAND-(1) NVMe Manual NVME-MICRON-NAND-(1) # [NAME](#NAME) nvme-micron-nand-stats - Retrieves NAND statistics of given micron device # [SYNOPSIS](#SYNOPSIS) ``` nvme [] micron vs-nand-stats ``` # [DESCRIPTION](#DESCRIPTION) This command prints NAND information (Total bytes written, Bad block count and Erase failures etc) for the given micron device. The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a namespace block device (ex: /dev/nvme0n1). This will only work on Micron devices devices of model numbers 54XX. Support for new devices may be added subsequently. # [OPTIONS](#OPTIONS) None # [GLOBAL OPTIONS](#GLOBAL_OPTIONS) The following options are defined at the top-level nvme command and are available to this subcommand: --dry-run Print the command that would be executed, but do not actually execute it. --no-ioctl-probing Disable probing for 64-bit IOCTL support. --no-retries Disable retry logic on transient errors. -o <fmt>, --output-format=<fmt> Set the reporting format to *normal*, *tabular, 'json*, or *binary*. Only one output format may be used at a time. --output-format-version=<version> Select the output format version. Version *1* uses the original field naming, while version *2* (default) provides more consistent and script-friendly field names. --timeout=<ms> Set the timeout for the command in milliseconds. -v, --verbose Increase the level of detail in the output. May be specified multiple times to further increase verbosity. These options can also be set as machine-wide defaults in [nvme-cli.conf(5)](/man/os/nvme-cli/nvme-cli.conf.5). A command-line flag always overrides the file. # [EXAMPLES](#EXAMPLES) •Retrieve NAND statistics information ``` # nvme micron vs-nand-stats /dev/nvme0 ``` # [NVME](#NVME) Part of the nvme-user suite 09/18/2026 NVMe --- Document: nvme-micron-nand-stats(1) from nvme-cli 3.1-r0 (Chainguard OS) Source: https://github.com/linux-nvme/nvme-cli