nvme-solidigm-vs-drive-info(1) — Chainguard OS Manuals

NVME-SOLIDIGM-VS-(1)

NVMe Manual

NVME-SOLIDIGM-VS-(1)

NAME

nvme-solidigm-vs-drive-info - Retrieve drive information

SYNOPSIS

nvme [<global-options>] solidigm vs-drive-info <device>

Retrieves and displays vendor-specific drive information for the given Solidigm NVMe device. This command provides additional details about the drive that may not be available through standard NVMe commands.

The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a namespace block device (ex: /dev/nvme0n1).

OPTIONS

GLOBAL OPTIONS

The following options are defined at the top-level nvme command and are available to this subcommand:

--dry-run

Print the command that would be executed, but do not actually execute it.

--no-ioctl-probing

Disable probing for 64-bit IOCTL support.

--no-retries

Disable retry logic on transient errors.

-o <fmt>, --output-format=<fmt>

Set the reporting format to normal, tabular, 'json, or binary. Only one output format may be used at a time.

--output-format-version=<version>

Select the output format version. Version 1 uses the original field naming, while version 2 (default) provides more consistent and script-friendly field names.

--timeout=<ms>

Set the timeout for the command in milliseconds.

-v, --verbose

Increase the level of detail in the output. May be specified multiple times to further increase verbosity.

These options can also be set as machine-wide defaults in nvme-cli.conf(5). A command-line flag always overrides the file.

EXAMPLES

•Retrieve and display the drive information:

# nvme solidigm vs-drive-info /dev/nvme0

•Retrieve the drive information in JSON format:

# nvme solidigm vs-drive-info /dev/nvme0 -o json

NVME

Part of the nvme-user suite

09/18/2026

NVMe