NVME-MICRON-SMART() NVME-MICRON-SMART()

# [NAME](#NAME)

nvme-micron-smart-log - Retrieve SMART/Health log with Micron vendor-specific fields

# [SYNOPSIS](#SYNOPSIS)

```
nvme [<global-options>] micron smart-log <device>
```

# [DESCRIPTION](#DESCRIPTION)

For the NVMe device given, retrieves the SMART/Health Information log page and displays it with Micron vendor-specific fields decoded.

The &lt;device&gt; parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a namespace block device (ex: /dev/nvme0n1).

This command extends the standard SMART log with Micron-specific fields:

OLEC (Operational Lifetime Energy Consumed)

Located at bytes 232-239 in the SMART log reserved area. Reports cumulative energy consumed by the device.

IPM (Interval Power Measurement)

Located at bytes 240-243 in the SMART log reserved area. Reports power measurement over sampling interval.

# [OPTIONS](#OPTIONS)

# [GLOBAL OPTIONS](#GLOBAL_OPTIONS)

The following options are defined at the top-level nvme command and are available to this subcommand:

--dry-run

Print the command that would be executed, but do not actually execute it.

--no-ioctl-probing

Disable probing for 64-bit IOCTL support.

--no-retries

Disable retry logic on transient errors.

-o &lt;fmt&gt;, --output-format=&lt;fmt&gt;

Set the reporting format to *normal*, *tabular, 'json*, or *binary*. Only one output format may be used at a time.

--output-format-version=&lt;version&gt;

Select the output format version. Version *1* uses the original field naming, while version *2* (default) provides more consistent and script-friendly field names.

--timeout=&lt;ms&gt;

Set the timeout for the command in milliseconds.

-v, --verbose

Increase the level of detail in the output. May be specified multiple times to further increase verbosity.

These options can also be set as machine-wide defaults in [nvme-cli.conf(5)](/man/os/nvme-cli/nvme-cli.conf.5). A command-line flag always overrides the file.

# [EXAMPLES](#EXAMPLES)

•Display SMART log in human-readable format:

```
# nvme micron smart-log /dev/nvme0
```

•Display SMART log in JSON format:

```
# nvme micron smart-log /dev/nvme0 -o json
```

# [NVME](#NVME)

Part of the nvme-user suite

---

Document: nvme-micron-smart-log(1) from nvme-cli 3.1-r1 (Chainguard OS)
Source: https://github.com/linux-nvme/nvme-cli