NVME-SEAGATE-CLEAR(1) NVMe Manual NVME-SEAGATE-CLEAR(1)

# [NAME](#NAME)

nvme-seagate-clear-pcie-correctable-errors - Clear Seagate PCIe error statistics

# [SYNOPSIS](#SYNOPSIS)

```
nvme [<global-options>] seagate clear-pcie-correctable-errors


                        [<device>]


                        [OPTIONS]
```

# [DESCRIPTION](#DESCRIPTION)

This command will only work on Seagate devices supporting this feature. Not all commands work across all product families.

The *&lt;device&gt;* parameter is mandatory and may be either an NVMe character device (ex: /dev/nvme0), or an nvme block device (ex: /dev/nvme0n1).

# [OPTIONS](#OPTIONS)

-s, --save

Specifies that the controller shall save the attribute

# [GLOBAL OPTIONS](#GLOBAL_OPTIONS)

The following options are defined at the top-level nvme command and are available to this subcommand:

--dry-run

Print the command that would be executed, but do not actually execute it.

--no-ioctl-probing

Disable probing for 64-bit IOCTL support.

--no-retries

Disable retry logic on transient errors.

-o &lt;fmt&gt;, --output-format=&lt;fmt&gt;

Set the reporting format to *normal*, *tabular, 'json*, or *binary*. Only one output format may be used at a time.

--output-format-version=&lt;version&gt;

Select the output format version. Version *1* uses the original field naming, while version *2* (default) provides more consistent and script-friendly field names.

--timeout=&lt;ms&gt;

Set the timeout for the command in milliseconds.

-v, --verbose

Increase the level of detail in the output. May be specified multiple times to further increase verbosity.

These options can also be set as machine-wide defaults in [nvme-cli.conf(5)](/man/os/nvme-cli/nvme-cli.conf.5). A command-line flag always overrides the file.

# [EXAMPLES](#EXAMPLES)

Clears the PCIe error statistics from the device.

```
# nvme seagate clear-pcie-correctable-errors /dev/nvme0
```

# [NVME](#NVME)

Part of the nvme-user suite

09/18/2026 NVMe

---

Document: nvme-seagate-clear-pcie-correctable-errors(1) from nvme-cli 3.1-r1 (Chainguard OS)
Source: https://github.com/linux-nvme/nvme-cli