NVME-SEAGATE-GET-(1) NVMe Manual NVME-SEAGATE-GET-(1) # [NAME](#NAME) nvme-seagate-get-host-tele - Retrieve Seagate Host-Initiated Telemetry in either hex-dump (default) or binary format # [SYNOPSIS](#SYNOPSIS) ``` nvme [] seagate get-host-tele [OPTIONS] ``` # [DESCRIPTION](#DESCRIPTION) This will only work on Seagate devices supporting this feature. Not all commands work across all product families. The *<device>* parameter is mandatory and may be either an NVMe character device (ex: /dev/nvme0) or an block device (ex: /dev/nvme0n1). # [OPTIONS](#OPTIONS) -n <NUM>, --namespace-id=<NUM> desired namespace The broadcast value 0xffffffff can also be given as *all* or *-1*. -i <NUM>, --log\_specific=<NUM> 1 - controller shall capture Data representing the internal state of the controller at the time the command is processed. 0 - controller shall not update the Telemetry Host Initiated Data. -b, --raw-binary output in raw format # [GLOBAL OPTIONS](#GLOBAL_OPTIONS) The following options are defined at the top-level nvme command and are available to this subcommand: --dry-run Print the command that would be executed, but do not actually execute it. --no-ioctl-probing Disable probing for 64-bit IOCTL support. --no-retries Disable retry logic on transient errors. -o <fmt>, --output-format=<fmt> Set the reporting format to *normal*, *tabular, 'json*, or *binary*. Only one output format may be used at a time. --output-format-version=<version> Select the output format version. Version *1* uses the original field naming, while version *2* (default) provides more consistent and script-friendly field names. Other versions are rejected. --quiet Suppress informational messages. Errors are still reported, and --quiet cancels any --verbose for the library log level. --set-options=<key=value>\[,<key=value>...] Set libnvme library options for this invocation. Supported keys are *force-4k*, *mi-probe-enabled*, *test-base-dir* and *test-sysfs-dir*. --timeout=<ms> Set the timeout for the command in milliseconds. *infinite* or *-1* waits without a time limit (0xffffffff). -v, --verbose Increase the level of detail in the output. May be specified multiple times to further increase verbosity. These options can also be set as machine-wide defaults in [nvme-cli.conf(5)](/man/os/nvme-cli/nvme-cli.conf.5). A command-line flag always overrides the file. # [EXAMPLES](#EXAMPLES) Get the host initiated telemetry log in hexdump or binary format for the specified device. ``` # nvme seagate get-host-tele /dev/nvme0 ``` # [NVME](#NVME) Part of the nvme-user suite 10/30/2026 NVMe --- Document: nvme-seagate-get-host-tele(1) from nvme-cli 3.2-r0 (Chainguard OS) Source: https://github.com/linux-nvme/nvme-cli