nvme-solidigm-smart-log-add(1) — Chainguard OS Manuals

NVME-SOLIDIGM-SMAR(1)

NVMe Manual

NVME-SOLIDIGM-SMAR(1)

NAME

nvme-solidigm-smart-log-add - Retrieve Solidigm SMART Log

SYNOPSIS

nvme [<global-options>] solidigm smart-log-add <device>


                        [--namespace-id=<nsid> | -n <nsid>]

DESCRIPTION

Retrieves the Solidigm vendor-specific SMART log for the given NVMe device and optionally the specified namespace, then displays the log.

The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a namespace block device (ex: /dev/nvme0n1).

OPTIONS

-n <nsid>, --namespace-id=<nsid>

Retrieve the log for the given nsid. If not specified, the log will be retrieved for all namespaces. The broadcast value 0xffffffff can also be given as all or -1.

GLOBAL OPTIONS

The following options are defined at the top-level nvme command and are available to this subcommand:

--dry-run

Print the command that would be executed, but do not actually execute it.

--no-ioctl-probing

Disable probing for 64-bit IOCTL support.

--no-retries

Disable retry logic on transient errors.

-o <fmt>, --output-format=<fmt>

Set the reporting format to normal, tabular, 'json, or binary. Only one output format may be used at a time.

--output-format-version=<version>

Select the output format version. Version 1 uses the original field naming, while version 2 (default) provides more consistent and script-friendly field names. Other versions are rejected.

--quiet

Suppress informational messages. Errors are still reported, and --quiet cancels any --verbose for the library log level.

--set-options=<key=value>[,<key=value>...]

Set libnvme library options for this invocation. Supported keys are force-4k, mi-probe-enabled, test-base-dir and test-sysfs-dir.

--timeout=<ms>

Set the timeout for the command in milliseconds. infinite or -1 waits without a time limit (0xffffffff).

-v, --verbose

Increase the level of detail in the output. May be specified multiple times to further increase verbosity.

These options can also be set as machine-wide defaults in nvme-cli.conf(5). A command-line flag always overrides the file.

EXAMPLES

•Retrieve the Solidigm SMART log for all namespaces:

# nvme solidigm smart-log-add /dev/nvme0

•Retrieve the Solidigm SMART log for namespace 1:

# nvme solidigm smart-log-add /dev/nvme0 -n 1

•Retrieve the Solidigm SMART log in JSON format:

# nvme solidigm smart-log-add /dev/nvme0 -o json

NVME

Part of the nvme-user suite

10/30/2026

NVMe