| DS2413(3) | One-Wire File System | DS2413(3) |
NAME
DS2413 - Dual Channel Addressable Switch
SYNOPSIS
Dual Switch
3A [.]XXXXXXXXXXXX[XX][/[ PIO.[A|B|ALL|BYTE] | sensed.[A|B|ALL|BYTE] |
See the file man3/standard_mini.3so.
]]
FAMILY CODE
3A
SPECIAL PROPERTIES
PIO.A PIO.B PIO.ALL PIO.BYTE
read-write, yes-no
State of the open-drain output ( PIO ) pin. 0 = non-conducting (off), 1
= conducting (on).
Writing zero will turn off the switch, non-zero will turn on the switch.
Reading the PIO state will return the switch setting. To determine
the actual logic level at the switch, refer to the sensed property.
ALL references both channels simultaneously, comma separated.
BYTE references both channels simultaneously as a single byte, with
channel A in bit 0.
sensed.A sensed.B sensed.ALL sensed.BYTE
read-only, yes-no
Logic level at the PIO pin. 0 = ground. 1 = high (~2.4V - 5V ). Really
makes sense only if the PIO state is set to zero (off), else will
read zero.
ALL references both channels simultaneously, comma separated.
BYTE references both channels simultaneously as a single byte, with
channel A in bit 0.
STANDARD PROPERTIES
See the file man3/standard.3so.
ALARMS
Use the set_alarm property to set the alarm triggering criteria.
DESCRIPTION
See the file man3/description.3so.
DS2413
The DS2413 (3) allows control of other devices, like LEDs
and relays. It differs from the DS2405 with a cleaner interface and
two channels The DS2413 also has two channels like the DS2406
and DS2407 but has no memory, and no alarm. There is also varying
types of switch and sensing in the DS2408, DS2409, LCD, DS276x,
DS2450.
Unique among the switches, the DS2413 can switch higher voltages, up to
28V.
ADDRESSING
See the file man3/addressing.3so.
DATASHEET
http://datasheets.maxim-ic.com/en/ds/DS2413.pdf
SEE ALSO
See the file man3/seealso.3so.
AVAILABILITY
http://www.owfs.org
AUTHOR
Paul Alfille (paul.alfille@gmail.com)
| 2005 | OWFS Manpage |