IBLSS(3)

Wall-TH Humidity and Temperature Sensor.

FE [.]XXXXXXXX2X00[XX][/[ TH/humidity | TH/latesthumidity | TH/temperature | TH/latesttemp | TH/led | firmware | subtype |

See the file man3/standard_mini.3so.

]]

TH/humidity

read-only, floating point
Humidity read by the chip at high resolution (~13 bits). Unit is % relative humidity. Negative values indicate a condensing condition. Conversion takes about one second.

TH/latesthumidity

read-only, floating point
Latest measured humidity. Reading this node will never trigger a combined humidity/temperature conversion. Intended for use after a previous read of the TH/temperature node or in conjunction with /simultaneous/iblss.

TH/temperature

read-only, floating point
Temperature read by the chip at high resolution (~13 bits). Units are selected from the invoking command line. See owfs(1) or owhttpd(1) for choices. Default is Celsius. Conversion takes about one second.

TH/latesttemp

read-only, floating point
Latest measured temperature. Reading this node will never trigger a combined humidity/temperature conversion. Intended for use after a previous read of the TH/humidity node or in conjunction with /simultaneous/iblss.

TH/led

write-only, yes-no
Switches the indicator LED on/off.

firmware

read-only, ascii
Firmware version of the Smart Slave displayed as major.major number. Firmware versions of the SS-WALL-TH before 1.4 had known issues with humidity reporting.

subtype

read-only, ascii
Subtype of the Smart Slave. Currently only possible value is "TH" signifying an SS-WALL-TH drywall temperature/humidity sensor.