/usr/bin/Geod3Solve

Man page:

SYNOPSIS
       Geod3Solve [ -i | -L bet1 omg1 alp1 ] [ -t a b c | -e b e2 k2 kp2 | -e2
       b f ] [ -u ] [ -d | -: ] [ -w ] [ -f ] [ -p prec ] [
       --comment-delimiter commentdelim ] [ --version | -h | --help ] [
       --input-file infile | --input-string instring ] [ --line-separator
       linesep ] [ --output-file outfile ]

DESCRIPTION
       The shortest path between two points on a triaxial ellipsoid at (bet1,
       omg1) and (bet2, omg2) is called the geodesic.  Its length is s12 and
       the geodesic from point 1 to point 2 has forward azimuths alp1 and alp2
       at the two end points.  Here bet and omg denote the ellipsoidal
       latitude, beta, and longitude, omega; alp is an abbreviation of alpha

       Geod3Solve operates in one of three modes:

       1.  By default, Geod3Solve accepts lines on the standard input
           containing bet1 omg1 alp1 s12 and prints bet2 omg2 alp2 on standard
           output.  This is the direct geodesic calculation.

       2.  With the -i option, Geod3Solve performs the inverse geodesic
           calculation.  It reads lines containing bet1 omg1 bet2 omg2 and
           prints the corresponding values of alp1 alp2 s12.

       3.  Command line arguments -L bet1 omg1 alp1 specify a geodesic line.
           Geod3Solve then accepts a sequence of s12 values (one per line) on
           standard input and prints bet2 omg2 alp2 for each.  This generates
           a sequence of points on a single geodesic.

OPTIONS
       -i  perform an inverse geodesic calculation (see 2 above).

       -L bet1 omg1 alp1
           line mode (see 3 above); generate a sequence of points along the
           geodesic specified by bet1 omg1 alp1.  The -w flag can be used to
           swap the default order of the 2 geographic coordinates, provided
           that it appears before -L.

       -t a b c
           specify the ellipsoid via its major semiaxis a, median semiaxis b,
           and minor semixis c.  By default, we have a = 6378172 m, b =
           6378102 m, c = 6356752 m, an approximate triaxial model of the
           earth.  (With this model omg = 0deg, corresponds to lon =
           -14.93deg.

       -e b e2 k2 kp2
           specify the ellipsoid via the median semiaxis, b and the shape
           parameters e2 = (a^2 - c^2)/b^2, k2 = (b^2 - c^2)/(a^2 - c^2), and
           kp2 = (a^2 - b^2)/(a^2 - c^2).  Simple fractions are allowed for
           e2, k2, and kp2.  Internally, the supplied values of k2 and kp2 are
           normalized so that k2 + kp2 = 1.

       -e2 b f
           specify a biaxial ellipsoid via its equatorial radius b and
           flattening f.  A simple fraction, is allowed for f.  In this mode,
           latitudes are interpreted as geodetic latitudes on both input and
           output.  If f is negative, bet and omg are swapped so that latitude
           and longitude have their conventional interpretations (e.g.,
           longitude measures the angle about the axis of symmetry).

       -u  unroll the latitude and longitude.  Normally, on output latitudes
           and longitudes are reduced to lie in [-90deg,90deg] and
           [-180deg,180deg) respectively.  However with this option, the
           returned longitude bet2 and omg2 are "unrolled" so that bet2 - bet1
           and omg2 - omg1 indicates how often and in what sense the geodesic
           has encircled the ellipsoid.

       -d  output angles as degrees, minutes, seconds instead of decimal
           degrees.

       -:  like -d, except use : as a separator instead of the d, ', and "
           delimiters.

       -w  toggle the longitude first flag (it starts off); if the flag is on,
           then on input and output, longitude precedes latitude (except that,
           on input, this can be overridden by a hemisphere designator, N, S,
           E, W).

       -f  full output; each line of output consists of 7 quantities: bet1
           omg1 alp1 bet2 omg2 alp2 s12.

       -p prec
           set the output precision to prec (default 3).  For distances, prec
           is the number of digits after the decimal point for ellipsoids
           which are approximately the same size as the Earth; for other
           ellipsoids the precision is adjusted to retain the same relative
           precision.  For latitudes and longitudes (in degrees), the number
           of digits after the decimal point is prec + 5.  For cartesian
           directions, the precision is prec + 7.

       --comment-delimiter commentdelim
           set the comment delimiter to commentdelim (e.g., "#" or "//").  If
           set, the input lines will be scanned for this delimiter and, if
           found, the delimiter and the rest of the line will be removed prior
           to processing and subsequently appended to the output line
           (separated by a space).

       --version
           print version and exit.

       -h  print usage and exit.

       --help
           print full documentation and exit.

       --input-file infile
           read input from the file infile instead of from standard input; a
           file name of "-" stands for standard input.

       --input-string instring
           read input from the string instring instead of from standard input.
           All occurrences of the line separator character (default is a
           semicolon) in instring are converted to newlines before the reading
           begins.

       --line-separator linesep
           set the line separator character to linesep.  By default this is a
           semicolon.

       --output-file outfile
           write output to the file outfile instead of to standard output; a
           file name of "-" stands for standard output.

INPUT
       Geod3Solve measures all angles in degrees and all lengths (s12) in
       meters.  On input angles (latitude, longitude, azimuth) can be as
       decimal degrees or degrees, minutes, seconds.  For example, "40d30",
       "40d30'", "40:30", "40.5d", and 40.5 are all equivalent.  By default,
       latitude precedes longitude for each point (the -w flag switches this
       convention); however on input either may be given first by appending
       (or prepending) N or S to the latitude and E or W to the longitude.
       Azimuths are measured clockwise from north; however this may be
       overridden with E or W.

       For details on the allowed formats for angles, see the "GEOGRAPHIC
       COORDINATES" section of GeoConvert(1).

ERRORS
       An illegal line of input will print an error message to standard output
       beginning with "ERROR:" and causes Geod3Solve to return an exit code of
       1.  However, an error does not cause Geod3Solve to terminate; following
       lines will be converted.

EXAMPLES
       Route from JFK Airport to Singapore Changi Airport on a triaxial
       ellipsoid:

         echo 40:38:23N 073:46:44W-19.43W X 01:21:33N 103:59:22E-19.43W |
           tr X '\n' |
           tools/Cart3Convert -G | tools/Cart3Convert -E -r | tr '\n' ' ' |
           tools/Geod3Solve -i -: -p 0
         => 003:15:05.9 177:27:09.0 15339505

       The steps here are shift for longitude of major axis (-19.43d), convert
       to geocentric for biaxial Earth, convert to ellipsoidal for triaxial
       Earth, compute geodesic distance.

SEE ALSO
       Cart3Convert(1).

       The algorithms are described in C. F. F. Karney, Jacobi's solution for
       geodesics on a triaxial ellipsoid, Technical Report, SRI International,
       Nov. 2025, <https://arxiv.org/abs/2511.01621>.

       The Wikipedia page, Geodesics on an ellipsoid,
       <https://en.wikipedia.org/wiki/Geodesics_on_an_ellipsoid>.

AUTHOR
       Geod3Solve was written by Charles Karney.

HISTORY