-A, --add-service | Add a virtual service. | man |
-E, --edit-service | Edit a virtual service. | man |
-D, --delete-service | Delete a virtual service, along with any associated real servers. | man |
-C, --clear | Clear the virtual server table. | man |
-R, --restore | Restore Linux Virtual Server rules from stdin. | man |
-S, --save | Dump the Linux Virtual Server rules to stdout in a format that can be read by -R|--restore. | man |
-a, --add-server | Add a real server to a virtual service. | man |
-e, --edit-server | Edit a real server in a virtual service. | man |
-d, --delete-server | Remove a real server from a virtual service. | man |
-L, -l, --list | List the virtual server table if no argument is specified. | man |
-Z, --zero | Zero the packet, byte and rate counters in a service or all services. | man |
--set tcp | Change the timeout values used for IPVS connections. | man |
--start-daemon state | Start the connection synchronization daemon. | man |
--stop-daemon | Stop the connection synchronization daemon. | man |
-h, --help | Display a description of the command syntax. | man |
-t, --tcp-service service-address | Use TCP service. | man |
-u, --udp-service service-address | Use UDP service. | man |
--sctp-service service-address | Use SCTP service. | man |
-f, --fwmark-service integer | Use a firewall-mark, an integer value greater than zero, to denote a virtual service instead of an address, port and protocol (UDP, TCP or SCTP). | man |
-s, --scheduler scheduling-method | scheduling-method Algorithm for allocating TCP connections and UDP datagrams to real servers. | man |
-M, --netmask netmask | Specify the granularity with which clients are grouped for persistent virtual services. | man |
--pe persistence-engine | Specify an alternative persistence engine to be used. | man |
-b, --sched-flags sched-flags | Set scheduler flags for this virtual server. | man |
-r, --real-server server-address | Real server that an associated request for service may be assigned to. | man |
-g, --gatewaying Use | | man |
-i, --ipip Use | | man |
--tun-type tun-type | | man |
--tun-port tun-port | | man |
--tun-nocsum Specify | | man |
--tun-csum Specify | | man |
--tun-remcsum Specify | | man |
-m, --masquerading Use | Note: Regardless of the packet-forwarding mechanism specified, real servers for addresses for which there are interfaces on the local node will be use the local forwarding method, then packets for… | man |
-w, --weight weight | Weight is an integer specifying the capacity of a server relative to the others in the pool. | man |
-x, --u-threshold uthreshold | uthreshold is an integer specifying the upper connection threshold of a server. | man |
-y, --l-threshold lthreshold | lthreshold is an integer specifying the lower connection threshold of a server. | man |
-c, --connection | Connection output. | man |
--timeout | Timeout output. | man |
--daemon | Daemon information output. | man |
--stats | Output of statistics information. | man |
--rate | Output of rate information. | man |
--thresholds | Output of thresholds information. | man |
--persistent-conn | Output of persistent connection information. | man |
--tun-info | Output of tunneling information. | man |
--sort | Sort the list of virtual services and real servers. | man |
--nosort | Do not sort the list of virtual services and real servers. | man |
-n, --numeric | Numeric output. | man |
--exact | Expand numbers. | man |
-6, --ipv6 | Use with -f to signify fwmark rule uses IPv6 addresses. | man |
-o, --ops | One-packet scheduling. | man |
--syncid syncid | Specify the syncid that the sync master daemon fills in the SyncID header while sending multicast messages, or the sync backup daemon uses to filter out multicast messages not matched with the SyncID… | man |
--sync-maxlen length | Specify the desired length of sync messages (UDP payload size). | man |
--mcast-interface interface | Specify the multicast interface that the sync master daemon sends outgoing multicasts through, or the sync backup daemon listens to for multicasts. | man |
--mcast-group address | Specify IPv4 or IPv6 multicast address for the sync messages. | man |
--mcast-port port | Specify the UDP port for sync messages. | man |
--mcast-ttl ttl | Specify the TTL value for sync messages (1 .. | man |